Timer Knob - light gray and white
Fits your NAV3330EWW!
$40.55
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your NAV3330EWW!
PartSelect Number
PS11739486
Manufacturer Part Number
WP22003993
Manufactured by
Whirlpool
Product Description
Timer Knob - light gray and white Specifications
This is the second part of a three-part knob. The cap and the skirt are sold separately. This knob is blue and white in colour.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Timer Knob - light gray and white
Troubleshooting
This part works with the following products:
Washer, Dryer.
This part works with the following products:
Maytag, Amana.
Part# WP22003993 replaces these:
AP6006412, 22003993, 27001090
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 7 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
been pull with plier to get it to run.
replaced timer and pull knob. easy and work great.
Other Parts Used:
-
huong from bentonville, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
12 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Plastic twirl knob shaft on timer assembly and chrome timer cap
0. Disconnected the dryer power supply
1. Removed the control panel (3 screws, star bit)
2. Detached the electric power supply cords from the timer assembly (took a bit of easing back and forth - do not pull by the electric cords, pull the socket itself)
3. Timer assembly eased off subsequently (held in place by three unscrewed receptacles)
4. Installed the new timer assembly, plugged back the supply cords, and installed the new timer knob, skirt and chrome cap.
They don't build Maytag equipment as they used to. We bought a fridge, washer and dryer 6 years ago - all three of them have had component, part stress and/or electronic sensor failures :-(
1. Removed the control panel (3 screws, star bit)
2. Detached the electric power supply cords from the timer assembly (took a bit of easing back and forth - do not pull by the electric cords, pull the socket itself)
3. Timer assembly eased off subsequently (held in place by three unscrewed receptacles)
4. Installed the new timer assembly, plugged back the supply cords, and installed the new timer knob, skirt and chrome cap.
They don't build Maytag equipment as they used to. We bought a fridge, washer and dryer 6 years ago - all three of them have had component, part stress and/or electronic sensor failures :-(
Other Parts Used:
-
Sudeepto from San Diego, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
9 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob broke off dryer timer
The two parts purchased were the corrects parts needed to do the job. (There's always a first time for everything!) When the plastic timer knob broke away from the timer stem, it left the silver timer cap's locking pin embedded in the timer stem. I could not remove the broken remains of the knob while the broken off pin was still in place. And it was impossible to grip the pin with pliers or tweezers without damaging the timer stem. As a solution I grabbed my whole-house vacuum cleaner hose and sucked the broken pin out of the timer stem. Total time of repair was about 20 minutes not including the two-hour brainstorming time-out that led me to the vacuum cleaner solution.
Other Parts Used:
-
John from Sterling Heights, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
5 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer Knob was broken so the knob would not stay on
I removed the silver cap and then removed the knob itself. I replaced the knob with the new part and also the silver cap with the part. The job was complete.
Other Parts Used:
-
Andrew from Beaver Falls, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer would not run=bad timer
simply replaced the timer.thank you for perfect service
Other Parts Used:
-
Bobby from Ridgely, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My timer knob and dryer knob broke on myd
I went to maytag website and ordered the parts it was so nice all I did was enter model number and it gave me easy interactions to order parts I needed. I repaired it myself with parts I ordered and with the instructions it came with it guided me step by step and the best part is I saved money on paying someone to do the labor!!!!
Other Parts Used:
-
leslie from san diego, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Time Cap broke away from Timer
Removed Screws on panel, pluged new timer into wire replace panel, but on new knob and cap and it was ready to go.
Other Parts Used:
-
Nancy from Fairfield, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Maureen Dunnie
January 31, 2019
Dryer timer knob spins it’s not mgrabbing the gear and when i pull it doesn’t start i have to turn and pull multiple ties until i reach a good spot that it grabs and starts
For model number MDE6400AYW
Hi Maureen,
Thank you for your question. The timer knob is likely stripped and it may need to be replaced. You will need to remove the knob and inspect it. Also check the shaft it goes on to see if there are any issues with that as well. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Zaineb
August 8, 2019
When i tried to start the dryer i rotate the knob it's seem rotating fine bit all settings does not work, only air fluff what can be the issue here ?
For model number MDE7400AZW
Hi Zaineb, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739486
Manufacturer Part Number: WP22003993
Manufacturer Part Number: WP22003993
Brand
Model Number
Description