GE WD35X21038 - Lower Rack Wheel Kit - 8 Pack | PartSelect.ca
Lower Rack Wheel Kit - 8 Pack – Part Number: WD35X21038
( Grid squares measure 1x1 inch )
Lower Rack Wheel Kit - 8 Pack – Part Number: WD35X21038 https://partselectca.azureedge.net/Schematics/GE/00125643i04.gif

Lower Rack Wheel Kit - 8 Pack

Your Price

CAD$44.76
Special Order

PartSelect Number PS11726733
Manufacturer Part Number WD35X21038
Manufactured by GE

If your dishwasher door will not close, is noisy when operating, or the dishes are not cleaning properly, you might need to replace one or more of the wheels. Each wheel and axle are made of plastic and fit into one another so they can be clipped on to the lower dishwasher rack.

This part works with the following brands: General Electric, Hotpoint, Kenmore.

This part works with the following products: Dishwasher.

This part fixes the following symptoms: Not cleaning dishes properly | Noisy | Door won’t close | Leaking

Videos For installing this part.

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Darleen
July 20, 2017
I need to change all the rollers and axels on my bottom rack according to my neighbor but I don’t know how many rollers there are supposed to be on the bottom rack and I don’t know how many “kits” I need to order. Pls help
Hello Darleen, no problem, we can help! On the lower dishrack in your dishwasher there are 4 rollers on each side, bringing the total rollers or wheels up to 8. Each wheel/roller also needs an axel. This kit comes with 8 rollers and 8 axels. That means you should order only one of these kits if you wish to replace all the rollers and axels on your lower dishrack. I hope this helped.

43 people found this helpful.

Was this helpful?
Terry
July 20, 2017
I purchased this kit for the lower rack on my dishwasher (GE) as you suggested and the axels are different then the ones on my dw. The ones on my dw snap in on the side at an angle but the new ones fit straight onto the rack. Will these ones still work? Thanks
Hi Terry, the studs in the lower rack wheel kit WD35X21038 were redesigned by the manufacturer. They may look different but they are compatible with your model, and will work for your lower dishrack. Best of luck with this repair!

14 people found this helpful.

Was this helpful?
Cory
July 20, 2017
I do not understand hwo to attach the wheel to it the axel and to attach the axel to the dishwasher. Help?!
Hi Cory, great question! On your lower dishrack, you have 8 wheels/rollers and 8 axels. The axels are inserted into the wheels/rollers. Once the wheel is stable and attached, the other end of the axel fastens onto the lower dishrack. Please let us know if you have any other questions.

13 people found this helpful.

Was this helpful?
Edward
September 25, 2017
I need some help deciding between this wheel pack kit and the single wheel part number: Ps259136 when i only need one wheel at this time. Other wheels are loose and often come off when sliding lower rack in and out of dishwasher. Are the wheels in this kit equal in size to the single wheel?
For model number GSC3200G00WW
Hi Edward, Thank you for your question. The wheels in the kit are the same size as the wheel that is sold individually. They would both work with your lower dishrack. So it just depends if you want to buy a package of them or just singular parts. I hope that helps. Good luck with your repair.

7 people found this helpful.

Was this helpful?
Arlene
October 16, 2017
Why is my lower rack on dishwasher rusting?
For model number GLD4400N10BB
Hi Arlene, Thank you for the question.Unfortunately I can not say why your rack is rusting for sure. It could have has a split or defect in the coating and water got into the metal parts and rusted. Hope this helps!

7 people found this helpful.

Was this helpful?
Anne
March 25, 2019
Need to replace the entire bottom rack due to broken roller arms where wheels attach. I do not see a price for the whole rack, wheels included please.
For model number HDA3540N00SA
Hello Anne, thank you for inquiring. The Lower Dishrack with Wheels for your model is part PS3486947.

4 people found this helpful.

Was this helpful?
Helen
October 8, 2017
Why does the bottom rack crash when opening?
For model number GLD4260L00SS
Hi Helen, Thank you for your inquiry. The rack may not be secured to the track correctly. There should be no crashing when you open the door. I would check to make sure it is secure on the track and to see if there is any issue with the rack as well. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Linda
May 28, 2019
I want to thank you so much for our video on how to replace the wheels on my dish washer!! you were so helpful & it worked just like that!
Hello Linda, Thanks so much for the positive feedback and for taking the time to write to us about your experience. We really do appreciate it. We hope you decide to do business with us again for your entire repair parts needs!

2 people found this helpful.

Was this helpful?
Joe
October 15, 2019
I recently purchased a home with a Kenmore elite ultra wash dishwasher. There are two model #s on the use & care guide (listed above). Most of the wheels from the bottom rack are missing. I need a replacement wheel set, but couldn't find anything to match the model #s on my documentation. Please recommend the proper parts.
For model number 665.1396, 665.1397
Hello Joe, thank you for writing. The model numbers you provided are partial with multiple variations using some different parts. We will need the rest of the model number to look into this. There should be at least five more characters after what numbers you already provided that will determine which parts list to use. Here is a link to some tips on our website for locating the model number for your dishwasher. https://www.partselect.com/Find-Your-Dishwasher-Model-Number.aspx. We look forward to hearing back from you!

2 people found this helpful.

Was this helpful?
Margie
October 25, 2019
Would you have replacement wheels for this model dishwasher.
For model number GSD6610K01WW
Hello Margie, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11726733 and they are only sold as a Kit. Hope this helps!

1 person found this helpful.

Was this helpful?

Customer Repair Stories

Average Repair Rating: 4.8 / 5.0, 77 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mark from Huntingdon Valley, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WD35X21038
Lower rack wheel was melted
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
498 of 510 people found this instruction helpful.
Was this instruction helpful to you?
Teresa from Phenix City, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WD35X21038
The rear wheels were missing on the lower rack.
The wheels came with a clip on part that clipped to the rack and the wheel snapped into that clip. I am a woman and it was easy for me to do. Thanks to Parts Select for being an easy to use and navigate site, for quick shipment and for good directions with the parts. Sincerely, Teresa from Alabama.
467 of 473 people found this instruction helpful.
Was this instruction helpful to you?
Joseph from Haymarket, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WD35X20994, WD35X21041, WD12X10304, WD35X21038
Worn/broken plastic parts were causing misery
Order arrived two days after being placed. Super easy to remove the old, worn, broken plastic parts and replace with new. Everything popped right on just as shown in the diagram. Our happiness with our dishwasher has increased 100%. BTW, thanks to the very helpful, friendly and knowledgeable staff at PartSelect.com -- next job, replace the ice maker in the freezer!
414 of 433 people found this instruction helpful.
Was this instruction helpful to you?
Wendy Baldwin from Stowe, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WD35X21038, WD12X271
The stud assembly in the middle of each wheel no longer stayed inside the wheel.
Just pulled off the old wheel. I just had to push in the stud to the wheel and pushed it on to the rack of the dishwasher. Very easy repair! Only disappointing part was that it bothered me to have to purchase the stud with the wheel. I was told they only came as the set. I only needed to purchase that inside stud. My wheels were fine.
371 of 387 people found this instruction helpful.
Was this instruction helpful to you?
michael from perry hall, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WD35X21038, WD12X10327, WD12X10304, WD12X271
wheel replacement
Pulled the end cap off and replaced the wheel.
most of the parts were for future repairs
229 of 430 people found this instruction helpful.
Was this instruction helpful to you?
MARIEANNE from WOODBRIDGE, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WD12X10278, WD35X21038
Wheels missing or broken
...on the lower rack of the dishwasher. I simply snapped the pieces together and then snapped them into place. No tools necessary other than my own two hands (and the scissors I used to cut open the package!)
92 of 94 people found this instruction helpful.
Was this instruction helpful to you?
Chris from Decatur, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WD12X10278, WD35X21038
wheel axles are defective - wheels fall off
The part indicated here is a new design to replace a defective part that fails to keep the wheels on the lower dish rack. So far, the new axles work fine. Removal/Replacement couldn't be easier - it is helpful to use needle-nose pliers to get the old axles out. The new ones just snap in. Wheels stay on just fine. The rack is designed to roll on 8 total wheels, 4 on each side.
85 of 149 people found this instruction helpful.
Was this instruction helpful to you?
Maria from wright, WY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WD12X10278, WD35X21038
Wheels on bottom rack were either broken or melted
It was really easy I just snapped the axle and the wheels together and then snapped them onto the rack! simple as that
80 of 145 people found this instruction helpful.
Was this instruction helpful to you?
Dennis from Gilbert, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WD12X10278, WD35X21038
Lower Tray wheels keep falling off and wobbly. Was a source of daily distress and complaining
We considered buying a new lower rack for the dishwasher which we were told was a new dishwasher when we took over the house. The wheels were constantly falling off when sliding out the tray. They wobbled as well. With the weight of dishes in the rack and malfunctioning wheels, it was a disaster! We found your site on the internet and instead of a new rack we decided to order a whole new set of 8 wheels and axle roller studs. Installation was easy. It's like having a new dishwasher! Tray rolls in/out effortlessly. Great solution for the prices, fast delivery. Everybody is happy! Thanks.
73 of 199 people found this instruction helpful.
Was this instruction helpful to you?
Bennett from Burke, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WD35X21038
Broken wheel
Siimply removed the rack and replaced the wheel assembly. Very easy
68 of 129 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
32 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    24
  • 4 Stars
    7
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5
-
Verified Purchase
Easy Repair (with one catch)

The wheels were exactly what I needed to replace the eroded wheel in my dishwasher. The only thing I will mention is that the clips that come with this set do not match my dishwasher, which have a side clip, not a front clip. My dishwasher is a Beaumark Whisper Wash IV, just in case you're looking for parts for the same model. That said, my clips weren't broken, just the wheels. They seem to erode about every 5 years.

5
-
Verified Purchase
Easy to install

Received within 2 days, easy to install. Great service !

5
-
Verified Purchase
Speedy delivery good product so far

I received my order in surprisingly short time. Bravo. Replacement also is design a little different than original but for better. Very happy with my purchase

5
-
Verified Purchase
Did not know what to expect. Everything fit perfect with ease.

Appliance is up and running in no time. Easy fix.

5
-
Verified Purchase
Exactly the part I needed

Got what I expected the very next day. Awesome service.

5
-
Verified Purchase
Good first experience with PartsSelect

Easy to install and the axles are a better design than the ones the dishwasher came with. All parts were correct and fit properly.

5
-
Verified Purchase
Worked awesome

Speedy service. No glitches what so ever.

5
-
Verified Purchase
Just perfect

Exactly what I was looking for. Everything went smoothly, besides the price that I found a bit to expensive I would say.

5
-
Verified Purchase
Part replacement for GE dishwasher

The wheels for the lower rack in my dishwasher very easy to put in and work beautifully.

5
-
Verified Purchase
The old wheels were fast replaced with the new ones.

My dishwasher lower rack is running as new.

Model Cross Reference

Brand
Model Number
Description
General Electric
1200L02
Dishwasher - DISHWASHER
Kenmore
18385
Dishwasher - DISHWASHER
General Electric
3000B10
Dishwasher - DISHWASHER
General Electric
3000W10
Dishwasher - DISHWASHER
Kenmore
361402891
Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
Kenmore
3631401190
Dishwasher
Kenmore
3631401191
Dishwasher
Kenmore
3631401590
Dishwasher
Kenmore
3631401591
Dishwasher
Kenmore
3631401592
Dishwasher
Kenmore
3631401890
Dishwasher
Kenmore
3631401891
Dishwasher
Kenmore
3631401892
Dishwasher
Kenmore
3631402190
Dishwasher
Kenmore
3631402191
Dishwasher
Kenmore
3631402192
Dishwasher
Kenmore
3631402590
Dishwasher
Kenmore
3631402591
Dishwasher
Kenmore
3631402592
Dishwasher
Kenmore
3631402890
Dishwasher
Kenmore
3631402891
Dishwasher
Kenmore
3631402892
Dishwasher
Kenmore
36314031000
Dishwasher
Kenmore
36314031001
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314032001
Dishwasher
Kenmore
36314038000
Dishwasher
Kenmore
36314038001
Dishwasher
Kenmore
36314039000
Dishwasher
Kenmore
36314039001
Dishwasher

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2020, Eldis Group Partnership. All rights reserved.