We're here to help you keep your washing machine in top shape with the Whirlpool Washer Tub Suspension Rod Kit. Straight from the original manufacturer, this kit is vital in ensuring your washing machine functions smoothly, as it maintains the machine's stability, especially when handling unbalanced loads. Designed specifically for Whirlpool washing machines, this kit ensures seamless compatibility. This Suspension Rod Kit includes everything you need as per your parts diagram, streamlining your maintenance tasks. As these components provide essential support to your washer tub, they help resurrect your machine to its original freshness, letting you have peace of mind during laundry time. Before you get started, remember to put safety first. Unplug your washing machine and wear work gloves to protect your hands during installation. Fixing a particular issue or performing regular service? No matter what kind of maintenance you're doing, you can count on this Suspension Rod Kit. Its design lives up to Whirlpool's gold standard of reliability, giving you confidence every step of the way.
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rock and roll on spin
Replaced the suspension rods. Must be done on its side as the rods only pull down. There is no slot.
Other Parts Used:
Bruce from LANDENBERG, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
October 7, 2017
I have been told the suspension on my machine has to be replaced. Is part ps11703291 a complete suspension replacement or will i require 4 of them ?? can i replace the springs alone or must i replace the rods as well.
For model number 26002010
Hello Chris, thank you for contacting us. This is the whole assembly for the suspension rods, you will receive all 4 of them with the springs as they are not sold separately. Good luck with the repair!
9 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Tom
January 21, 2018
Does this suspension kit contain 4 #16, #17 and #18 as shown on the drawing and is it the correct suspension kit for my model of washer?
For model number MVWX700XL2
Hello Tom, Thank you for your inquiry. Yes, we show that it has 4 rods with the supports and it is compatible to the model number you supplied. Hope this helps!
6 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Bill
September 21, 2022
I believe that my washer might have issues with the suspension rods but your web site does not point to them (but to to suspension holders). The washer definitely rocks and rolls when the spin cycle is attempted. I believe agitation works fine. I replace the suspension holders with no change. I believe I could change out these rods though there are no instructions on how to "release" them from below. A repairman talked about this being a bearing issue and then too costly to repair. I would not mind a $130+ cost for parts if there were a high probability it works. The other causes listed of "shake and move" such as the drive pulley seem to be very rare with the pulley being defective causing slow spin, no spin, etc. rather than a rocking. The washer reports no error code. I did note that one of the rods was very rusty (near the bleach dispenser). When I push down on the tub it does bounce 2-3 times but no excessively but I don't know what a normal amount of spring it should have!
For model number MVWC400XW1
Hi Bill, thank you for contacting us. We have researched your model number and found that most of the time when your washer rolls during a spin cycle, you need to replace the suspension rods, part number PS11703291. This is a suspension rod kit that contains all four rods. Please submit a new question if you have any follow-ups.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
James
November 24, 2023
Does this suspension kit fit my washer? If so should I also purchase the other two items that list below the suspension kit. My problem is the washer will not spin dry in normal cycles and has to be run on the drain and spin cycle after rearranging the wash load.
For model number MVWC400XW3
Hi James, thank you for the great question. Our research has found that yes this is the correct part number for the suspension on your model, also the other two items that you mentioned are now included in this kit. We have also included an installation video to assist you with your repair. We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Ron
June 1, 2025
Our Maytag washer operates through all steps of the cycle properly. However, as soon as the spin cycle begins, it starts howling loudly. As it picks up speed, the howling increases until at top speed it sounds like a jet taking off. I was thinking of replacing the suspension kit, but it doesn't go off balance, just extreme noise.
For model number MVWC400XW3
Hi Ron, thank you for reaching out. Before replacing the suspension rod kit, we would recommend checking the basket hub. You may need to replace the hub kit, part number PS2581262, to fix the issue. We hope this solves your problem!
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension rod supports. There...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/Washer-Springs-and-Shock-Absorbers.htm"},{"position":2,"name":"W10780051","title":"W10780051","url":""}]
