Temperature Switch

The swap out was easy except for figuring out how to remove the timer knob off without breaking it so the faceplate can be removed and the switch can be swapped. In back of the timer switch with some needle nose pliers you pull a plastic pin back and hold it back. This will allow you to pull off the timer switch knob. However, the real problem was so simple I could kick myself. The COLD WATER PRESSURE WAS TOO STRONG. I simply turned down the cold water pressure some and the washer goes through all it's cycles. I really hope this helps someone else out there before they go buying parts or even a new machine. I did hours of internet research and I didn't come across this simple answer. I changed an electric water valve and a temperature switch before realizing it.