Part Location Diagram of WD34X11158 GE Keypad - Black
See part 719 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Keypad - Black

$245.75
  Special Order
PartSelect Number PS1018574
Manufacturer Part Number WD34X11158
Manufactured by GE
Product Description

Keypad - Black Specifications

Also known as overlay or touchpad.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD34X11158 replaces these:
AP3868891, 1168420
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 2 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Front gasket leak, jets clogged, keypad shorted out
Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings.
I simply pulled the front gasket out
Other Parts Used:
Lower Spray Arm - Gray Upper Spray Arm Middle Spray Arm Tub Gasket Upper Spray Arm Bearing Lower Spray Arm Bearing
  • Robert from Sacramento, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
8 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Touch panel was not operating
Turned off power to the dishwasher. Used Lock out Tag Out Protocol.
Removed the inside Stainless panel of dishwasher. followed the wiring from the keypad to the internal board. Disconnected the wiring to the board. Removed the keypad and wiring from board. installed new keypad assembly connecting to the internal board and then affixing the new keypad assembly to the top of the dishwasher door assembly.
Other Parts Used:
  • Robert from ORLANDO, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
November 20, 2017
How do I change the touchpad? I can't find instructions
For model number PDW9980N00SS
PartSelect logo
Hi Michael, Thank you for the question. First unplug the appliance from its power source.Next remove the inner door panel. Then you can access the ribbon cable for the touch pad. Disconnect the ribbon cable from the board and remove the board from the panel. Now peel the old keypad and install the new one in reverse order. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1018574
Manufacturer Part Number: WD34X11158
Brand
Model Number
Description
General Electric
PDW9700L00II
Dishwasher
General Electric
PDW9700N00II
Dishwasher
General Electric
PDW9700N20II
Dishwasher
General Electric
PDW9900L00BB
Dishwasher
General Electric
PDW9900N00BB
Dishwasher
General Electric
PDW9900N20BB
Dishwasher
General Electric
PDW9980L00SS
Dishwasher
General Electric
PDW9980N00SS
Dishwasher
General Electric
PDW9980N20SS
Dishwasher
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service