This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
The lower spray arm is mounted to the bottom of your dishwasher tub, and it rotates and sprays water to clean the dishes in the lower dish rack. This spray arm is made of gray plastic, and is approxim...
The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure ev...
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In ...
This part is the replacement door hinge cable for your dishwasher. The door hinge cable connects the door spring to the door hinge, and allows the door to open in a controlled fashion. If you open you...
This dishwasher retainer connects to the removable tine.
$10.28
Special Order
Questions And Answers for PDW9980N00SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
January 29, 2023
How do I remove and clean filter(s)
For model number PDW9980N00SS
Hi Mary, thank you for your query. Your dishwasher has two filters at the bottom: a large filter screen that catches large food particles, part number PS959277 and a smaller filter screen that catches fine particles, part number PS958919. We have attached a video that will assist you in removing the fine filter. To clean the filter, rinse it under running water. Use a soft-bristled toothbrush to get any chunks of stubborn food. Next, place it in a mix of warm water and vinegar. Finally, let this solution soak for at least 30 minutes. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dean
August 9, 2023
Need to replace my upper rack and need to order it
For model number PDW9980N00SS
Hi Dean, thank you for reaching out. The upper dishrack for your model is part number PS8690633. If you need help placing an order, customer service is open 7 days a week!
Hello Kelly, thank you for reaching out. If your dishwasher is not draining completely, we suggest that you check the following parts: check valve, drain pump, sump, sump filter, and drain tube. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
What what buttons to push to manually drain the dishwasher?
For model number PDW9980N00SS
Hello Kelly, thank you for your question! To force your dishwasher to drain, follow these steps:
1. Press and hold the start button for 3 seconds.
2. Listen for the draining sound and wait until it stops before checking to see if all the water has drained.
3. Repeat the process if there's any remaining water.
Follow these steps to manually drain the dishwasher:
1. Remove all the dishes and silverware.
2. Turn off the power supply and water supply.
3. Remove standing water from the dishwasher.
We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Pull old rack out, slip new one in! One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.