My Orders
- Home
- WMH31017HB09
- Instructions
WMH31017HB09 Whirlpool Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
machine was dead.
3 of 9 people
found this instruction helpful.
-
Mark from Smithtown, NY
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "P
... Read more
art Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)
Read less
Was this helpful?
Thank you for voting!
None
5 of 16 people
found this instruction helpful.
-
Paul from SIERRA VISTA, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
Put in the charcoal filter buy taking two screws out and replacing.
Was this helpful?
Thank you for voting!
broke glass plate
0 of 2 people
found this instruction helpful.
-
Thomas C from Reminderville, OH
- Really Easy
- Less than 15 mins
Put new plate in and it was fixed
Was this helpful?
Thank you for voting!
Broken turntable tray
0 of 2 people
found this instruction helpful.
-
Nelson from Orlando, FL
- Really Easy
- Less than 15 mins
Replaced tray. No tools needed.
Was this helpful?
Thank you for voting!
Microwave had no electrical
1 of 5 people
found this instruction helpful.
-
Larry from HARKER HTS, TX
- Really Easy
- 30 - 60 mins
-
Pliers
I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.
Was this helpful?
Thank you for voting!
it was working fine and it stopped order a fuse and it wasn't the problem
0 of 4 people
found this instruction helpful.
-
Herb from Auburn, IN
- A Bit Difficult
- 1- 2 hours
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
Was this helpful?
Thank you for voting!
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
4 of 18 people
found this instruction helpful.
-
Stephen from SPRINGFIELD, WV
- Very Difficult
- 1- 2 hours
-
Pliers, Screw drivers
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Was this helpful?
Thank you for voting!
replace filter
-
Barbara from Cranston, RI
- Easy
- Less than 15 mins
slide into place under hood
Was this helpful?
Thank you for voting!
Microwave turntable stopped rotating.
-
Larrt from Minooka, IL
- Easy
- 15 - 30 mins
-
Screw drivers
1. Unplug the power cord from the wall socket. 2. Remove the 10 screws holding the bottom cabinet cover in place. The bottom cabinet cover will swing down allowing acces to the inside ofe the microwave. 3. Remove the connector from the turntable motor. 4. Use a T15 Torx driver to remove the 2 Torx screws holding the motor in place.
... Read more
5. Remove the motor. 6. Reverse the process using the new motor.
Read less
Was this helpful?
Thank you for voting!