1. Home
  2. WM3477HW
  3. Instructions

WM3477HW LG Washer Dryer Combo - Instructions

All Instructions for the WM3477HW
91 - 95 of 95

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Increasingly noisey while on spin cyle
  • Craig from Pisek, ND
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set
Disconnected power. Removed washer top, upper front control panel, and front panel. Removed hoses from washer drum housing. Removed cabling and support springs and stabilizers. Removed drum housing from cabinet. Removed bolts that secure the two halves of housing. Removed rotor from drum shaft. Removed stator from housing. Supported drum housing and with hammer and punch, removed drum shaft from bearings. Replaced bearings and seal and reassembled in reverse order.
Read less
Was this helpful?
Thank you for voting!
Water not draining from tub, error code "OE"
  • Robert from Ogdensburg, NJ
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Found great Youtube video, followed step by step. Only difficult part was getting the tub gasket clamp back on. But all in all pretty easy. If tub won't drain and weird noise coming from pump do not hesitate to do it yourself and save some coin!
Was this helpful?
Thank you for voting!
R&R Drain Pump
  • Dion from Middletown, DE
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
The pump is apparently used for more than one washer, and the R&R instructions may be significantly different. I found a youtube video for my exact washer.
Was this helpful?
Thank you for voting!
noisy during spin
  • paula from port st. lucie, FL
  • Very Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
disasemble the whole mashine... split outer tank...pound out old bearings... press in new... reassemble.... look for leaks... repair man estament..$900...cost me less than 100.. took 4 hours
Was this helpful?
Thank you for voting!
would not pump the water dry
  • Jinjer from Colorado City, AZ
  • A Bit Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
greate very easy and the parts fit awsome the shiping was fast and easy very satified
Was this helpful?
Thank you for voting!
All Instructions for the WM3477HW
91 - 95 of 95