WM3477HW LG Washer Dryer Combo - Overview

Diagrams for WM3477HW

See every part. Know exactly what you need.

Parts for the WM3477HW

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washing Machine Drain Pump – Part Number: 4681EA2001T
$138.95
In Stock
Washing Machine Drain Pump
★★★★★
★★★★★
(111)
Part #4681EA2001T
The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after the spin cycle speed is maintained for a specific period of time. To make this installation you will need a Phillips screwdriver, a small flat-blade screwdriver, a pair of needle-nose pliers, and a pair of slip-joint pliers. Note that the pump casing is not included. This medium-difficulty repair may vary, but can generally be started by disconnecting power, then removing the top of the washer by taking out the four back screws and two small brackets. Then, remove the front panel by taking out the two screws and eight tabs that should be taken from the top. Moving down the front of the washer, remove the door, latch, tub gasket, and drain cover. Disconnect the drain hoses and clip from under the drain assembly, and install new assembly from there. Reassemble parts in direct reverse order -- taking photos during disassembly and keeping parts clearly organized can help here. Despite the number of steps, you will only need a standard Phillips screwdriver to complete this repair.
Read less
Water Inlet Valve - Hot – Part Number: 5220FR2006H
$67.05
In Stock
Water Inlet Valve - Hot
★★★★★
★★★★★
(18)
Part #5220FR2006H
This hot water inlet valve is designed to regulate water flow into the washing machine during operation. Featuring a standard hose fitting inlet and a single water outlet, it opens as needed to allow hot water into the appliance. If the valve is defective, you may notice slow filling, no filling at all, or water leaks. A simple way to test the valve is to unplug the washer when the issue occurs—if water continues to flow, the valve is likely faulty and should be replaced. The part measures approximately 3 inches in length by 3 inches in width and is sold individually.
Read less
Door Lock Assembly – Part Number: EBF49827801
$72.55
In Stock
Door Lock Assembly
★★★★★
★★★★★
(6)
Part #EBF49827801
This door lock assembly is a critical component in compatible washing machines, responsible for confirming that the door is securely closed before initiating a wash cycle. When functioning properly, it communicates with the control system to engage the locking mechanism. A faulty switch may prevent the door from latching, opening, or starting the cycle. Located behind the front panel, replacement requires removal of the door gasket and access to the internal housing. Sold individually.
Read less
Rear Tub Gasket – Part Number: 4036ER2004A
$47.25
In Stock
Shock Absorber – Part Number: 383EER3001G
$59.35
In Stock
Shock Absorber
Part #383EER3001G
Sold individually.
Pump Filter – Part Number: 383EER2001A
$34.22
In Stock
Pump Filter
★★★★★
★★★★★
(3)
Part #383EER2001A
This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.
Read less
Washer Handle – Part Number: MEB61281101
$30.75
In Stock
Washer Handle
Part #MEB61281101
Washer Hose Connector – Part Number: 5214FR4006G
$15.35
In Stock
Washer Hose Connector
★★★★★
★★★★★
(1)
Part #5214FR4006G
This part is the replacement connector hose or clean-out drain hose for your washer. It is black in color and is sold individually. The connector hose drains water out of the washer if the drain cycle is not working. If the hose breaks, it will not be able to drain the water properly, and you may experience a water leak. Be sure to disconnect your washer from the power source, as well as the water source before you begin this repair. This is an OEM part sourced directly from the manufacturer.
Read less
Tub Bearing – Part Number: 4280FR4048N
$57.15
In Stock
Tub Bearing
★★★★★
★★★★★
(1)
Part #4280FR4048N
This washing machine tub bearing supports the inner drum and allows it to spin smoothly during wash and spin cycles. It helps reduce friction, maintain proper drum alignment, and keep the washer running quietly and efficiently. If the bearing is worn or damaged, you may notice excessive noise, vibration, drum movement, or rough spinning performance. Replacing a faulty bearing can help restore smooth drum operation and improve overall washer performance. Because washers may use more than one bearing, it is important to verify the correct part for your model before ordering. It is also a good idea to inspect related components, such as the tub seal, while performing this repair.
Read less
Washer Tub Bearing – Part Number: MAP61913708
$69.25
On Order
Washer Tub Bearing
Part #MAP61913708
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
Holder – Part Number: 4930FR3040A
$13.15
In Stock
Holder
Part #4930FR3040A
Locking Pin – Part Number: 4774FR3118B
$13.15
Special Order
Locking Pin
Part #4774FR3118B
The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
View More

Questions And Answers for WM3477HW

Ask our experts a question about this model and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Felixberto - For model number WM3477HW
April 2, 2022
Drum does not move at all and "error code le" appears. Tried to disconnect the power supply for more than 30mins several times but still the same problem. Could it be motor or the main control board causing the problem or both? It will be much appreciated also if you can send a me please complete spare parts list. Thank you.
Chris Boyle Profile
Hello Felixberto. Thank you for the question. The Parts lists is on the site, just enter the model umber of the appliance. The LE error code indicates that the motor is locked, possibly due to a heavy wash load. If the Load is not too heavy, the motor (Stator) may need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
$152.71
On Order
STATOR ASSEMBLY
3 people found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the WM3477HW

How this model fails, and the parts that fix it.

Will not drain
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Draining Issues
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Show All
Engine runs but does not pump water
Fixed by
these parts
Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Spinning Issues
Fixed by
these parts
Fixing
Fixing
Show All
Burning smell
Fixed by
these parts
Fixing
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Not draining
Fixed by
these parts
Fixing
Show All

Videos related to models starting with WM3477HW

View More

Watch our pros, then fix it yourself.

Replacing the Washing Machine Drain Pump

Replacing the Washing Machine Drain Pump

Replacing the Washing Machine Drain Pump

Replacing the Washing Machine Drain Pump

Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Hot

Replacing the Door Lock Assembly

Replacing the Door Lock Assembly

Replacing the Door Lock Assembly

Replacing the Door Lock Assembly

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washing maching wouldn't drain
592 of 761 people found this instruction helpful.
  • Jorge from Apple Valley, CA
  • Easy
  • 1- 2 hours
  • Screw drivers
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer cam e apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Read less
Was this helpful?
Thank you for voting!
noisy operation, sometimes did not drain, gave OE code
60 of 81 people found this instruction helpful.
  • Michael from RALEIGH, NC
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman.
Was this helpful?
Thank you for voting!
Door locking mechanism
28 of 36 people found this instruction helpful.
  • Aaron from SAN ANTONIO, TX
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
I received the locking device. I received an email from parts select with a repair video link. I watch the video and repeated the steps. Very easy and educational. Thank you for simplifying something I have limited experience doing.
Was this helpful?
Thank you for voting!
View More