WF42H5000AW Samsung Washer - Overview

This part helps keep your front-load washer safe and working properly. It locks the door during cycles so it doesn’t open unexpectedly, and it also tells the washer when the door is shut so it can start. If your washer won’t start or the door won’t lock or open, this part might be the fix. It’s made to fit many models and includes a four-lead switch for reliable performance. Just unplug the washer before installing.

This part is used for the shaft on rear of the tub. Sold individually.

A washer that walks across the floor or becomes unusually noisy may have a weak suspension damper. The rear shock absorbs tub movement during washing and spinning, helping the machine run more smoothly. These symptoms do not prove the damper has failed, so first check the floor, leveling feet, load size, and suspension springs. Match the ...Read morereplacement to the complete model because mounting ends and force ratings can differ. Disconnect power and water before opening the cabinet. Keep the tub supported, note each fasteners position, and avoid pinching hoses or wires during reassembly. Run an empty rinse and spin cycle to check for leaks, noise, and steady movement.

This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.

This drain pump is designed to remove water from the washer during the drain portion of the cycle. It is recommended to unplug the washer before installation to ensure safety. The Samsung Washer Drain Pump (part number DC31-00054A) is a crucial component that ensures efficient water removal during the washer's draining cycle, thus maintai...Read morening optimal washer performance. This part serves as a replacement for part number DC31-00016A. It's indispensable for resolving common drainage issues, such as residual water remaining in the washer drum. To ensure safe and proper installation, wear protective gloves. This safeguard will protect your hands from any sharp edges or components inside the washer.

The thermistor monitors and helps regulator the water temperature in the washer.

The drain pump removes water from the washer during the drain portion of the cycle.