All Installation Instructions for Whirlpool Dishwasher WDF330PAHB0

Top rack of dishwasher kept pulling all the way out

Our dishwasher's top rack would pull too far out which made it hard to stay in alignment. It had lost it's track stop. I easily ordered the part from PartSelect, and it came more quickly than I expected; I clicked it in place and it runs like new. It's wonderful to deal with a company that knows the frustration of not having your appliance in good working orfer.
Thank you.
Sue M
Masdsachusetts

Parts Used:

Dishwasher Rack Track Stop

Susan from Arlington, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

installer from lowes di not do it right, forgot to put scew in, instead he used shims, as usuall no more installs from Lowes

followed directions, a kid could have done it,

Parts Used:

Dishwasher Mounting Bracket

Joel from ROLLA, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Wheel on lower rack broke.

New one snapped right into place.

Parts Used:

Wheel Assembly

Martin from Union Bridge, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

3 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Upper dishrack roller assembly in slide rail broke, causing upper dishrack to sag

I used a flat blade screwdriver to compress one arm of the endcap of the slide rail to free it. I then slid up the locking slide of the old roller assembly freeing it from the upper basket,and put the new part in its place. I then put the roller back in the slide rail and replaced the endcap.

Parts Used:

Dishrack Roller Assembly

Andrew from SACRAMENTO, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Latch broke

I saves the old part to see how it was to be installed. It was very easy. I saved the $50 + dollars for a SERVICE CALL.

Parts Used:

Dishwasher Door Actuator

Don from St. Joseph, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Leak around door

Pulled out old gasket, pressed in new starting middle top. No more leak.

Parts Used:

GASKET

SAMUEL W from SARASOTA, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Wheel assembly was cracked

I just snapped the old one off and snapped the new one on..

Parts Used:

Wheel Assembly

JoAnn from EAST WINDSOR, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

front track stop broke on both sides of the upper tray

Very simple to repair The front track stops just slide into place, easy. When I looked for these parts this place was the least expensive and the quickest delivery I have ever had. Quick, efficient and friendly online staffing. Thank you, Deb

Parts Used:

Dishwasher Rack Track Stop

Deb from LAWTON, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Sent the wrong part

Had to repurchase the correct one. I was also sent a used part that I am still waiting for a call tag to send back. I was also given an email address for customer service but low and behold it also didn’t work!!!!

Parts Used:

Dishwasher Rinse Aid Cap

Judith from MOUNTAIN TOP, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Old door gasket was leaking.

Watched YouTube first of course. Pulled off the old gasket, found the center of the new gasket and started installing the gasket from the very top and all the way down the sides. I made sure it was in tightly and smooth. No more leak, should have listened to my wife sooner!

Parts Used:

GASKET

Michael from WILLARD, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Replacing upper rack rollers

Followed very simple instructions to easily install. The only tool needed was a flathead scredriver to pop off caps to remove old, broken rollers. New rollers simply click into place. Piease aren't cheap, but significantly less than a new dishwasher.

Parts Used:

Dishrack Roller Assembly

Tahir from ARLINGTON, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Dishwasher circulation pump malfunction

Tipped over washer, removed attachment bolts, installed new pump by clamping water hoses. Be sure to use proper crimping pliers, not the generic slip joint pliers. Replacement pump included required new clamps.

Parts Used:

Dishwasher Rack Track Stop

al from Fuquay Varina, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

The gasket listed on your website is to thick. So after installation the door would close. I put the old gasket back in the door closed. However, the dishwasher still leaks soap after a cycle..

As stated above the repair did not go well because the gasket was too wide and the door would close. Suggest you talk with Whirlpool about the part they sold you for my model of dishwasher.

Parts Used:

GASKET