WDF330PAHB0 Whirlpool Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Rack Track Stop – Part Number: WP8565925
$16.38
In Stock
Dishwasher Rack Track Stop
★★★★★
★★★★★
(95)
Part #WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy and takes less than 30 minutes to complete. Simply snap the old part out and snap the new part into place. You will not require any tools to complete the job. This is an authentic part approved by the manufacturer.
Dishwasher Mounting Bracket – Part Number: WP8269145
$23.11
In Stock
Dishwasher Mounting Bracket
★★★★★
★★★★★
(30)
Part #WP8269145
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
Dishwasher Heating Element – Part Number: W10518394
$53.85
In Stock
Dishwasher Heating Element
★★★★★
★★★★★
(72)
Part #W10518394
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dishes are not drying or the water in the dishwasher is not getting hot you may need to replace the element. This kit includes the heater, two heater fasteners, and is a genuine OEM part. Please remember to disconnect the power before starting the repair. Use a multi-meter to test your heating element for continuity to determine whether this is the part that is causing your symptom. This part does not include any washers. To make your repair, disconnect the wires from the bottom of the element in the back, remove the plastic nuts holding it in place, remove the element, and repeat these steps in reverse order to install your new part. This is an easy repair that requires only a screwdriver, wrench set, and should take less than 30 minutes.
Dishwasher Friction Sleeve – Part Number: WP8268961
$14.22
In Stock
Dishwasher Friction Sleeve
★★★★★
★★★★★
(37)
Part #WP8268961
This part helps to keep your door quiet when it opens and closes.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Dishwasher INLET VALVE – Part Number: W11175771
$83.55
In Stock
Dishwasher INLET VALVE
★★★★★
★★★★★
(43)
Part #W11175771
This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Drain Hose – Part Number: 8269144A
$35.15
In Stock
Drain Hose
★★★★★
★★★★★
(22)
Part #8269144A
This drain hose is 6 and 1/2 feet.
Circulation Pump – Part Number: W11612326
$117.67
In Stock
Circulation Pump
★★★★★
★★★★★
(27)
Part #W11612326
This circulation pump is a genuine replacement part designed for select dishwasher models. It plays a critical role in the wash and rinse cycles by drawing water from the tub, pressurizing it, and distributing it to the spray arms for thorough cleaning. Common signs of a failing pump include water leaks, loud operational noise, poor cleaning performance, and reduced water circulation. Causes may include electrical faults, impeller blockages, motor failure, or physical damage. Always disconnect power before servicing your appliance.
Dishwasher Filter – Part Number: W10872845
$63.42
In Stock
Dishwasher Filter
★★★★★
★★★★★
(14)
Part #W10872845
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will need to be replaced. A good indication of a damaged filter is if your dishwasher is not draining or cleaning the dishes properly. This filter has a gray plastic top and bottom that are approximately 5 inches in diameter. This is a genuine OEM part that comes directly from the manufacturer. To replace the filter, simply turn it counterclockwise to unlock, and then screw in the new filter
Dishwasher Retainer Clip – Part Number: WPW10503548
$35.05
In Stock
Dishwasher Retainer Clip
★★★★★
★★★★★
(8)
Part #WPW10503548
This part is used to hold the access panel in place. Sold individually.
Dishwasher High Limit Thermostat – Part Number: WP661566
$41.34
In Stock
Dishwasher High Limit Thermostat
★★★★★
★★★★★
(9)
Part #WP661566
Help protect the dishwasher from overheating with this high-limit thermostat. Mounted beneath the tub, it responds to excessive heat by cutting power to the heating element. A failed thermostat may interrupt heating, leaving wash water too cool or dishes wet after the drying cycle. Replacing a faulty unit helps restore the heater safety circuit and proper heating operation. This temperature-sensitive switch works as a protective limit during use. Disconnect electrical power before accessing the underside of the dishwasher or removing any wiring.
Dishwasher Retainer Clip – Part Number: WPW10503549
$10.32
In Stock
Dishwasher Retainer Clip
★★★★★
★★★★★
(9)
Part #WPW10503549
This part is used to hold the access panel in place. Sold individually.

Questions And Answers for WDF330PAHB0

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sam - For model number WDF330PAHB0
November 22, 2022
Water will not pump out
Chris Boyle Profile
Hello Sam, thank you for reaching out. According to our research on the model, the problem appears to be with the Drain Hose, part number PS2358130. If that does not help then the issue is likely to be with the Drain Pump, part number PS11738151. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
$35.15
In Stock
Drain Hose
$105.50
In Stock
Dishwasher Drain Pump
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
KURT - For model number WDF330PAHB0
February 28, 2024
How to remove and clean arm
Chris Boyle Profile
Hello Kurt, Thank you for your inquiry. Checking your model, for the upper spray arm you would just need to grab the base and twist it clockwise to remove it, for the lower spray arm, twist it counterclockwise at the base. To clean both spray arms, you can use a solution of warm soapy water to clean the arm and for excess debris, you can soak the arm in a solution of 2 parts warm water and 1 part vinegar. Afterwards, you can also use Affresh dishwasher cleaner to keep away mineral buildup. We hope this helps.
$42.29
In Stock
Dishwasher Upper Spray Arm
$62.65
In Stock
Lower Spray Arm
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the WDF330PAHB0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Heater element broken.
238 of 282 people found this instruction helpful.
  • Dennis from Sedro Woolley, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers, Wrench set
Step 1: Remove the screws in the bottom of the countertop.

Step 2: Remove the screws holding the bottom kickplate.

Step 3: Loosen leveling legs.

Step 4: Pull dishwasher out of hole.

Step 5: Unlplug dishwasher.

Step 6: Disconnect wires from bottom of element in back.

Step 7: Remove plastic nuts holding element in place.

Step 8: Remove element.

Step 9: Reverse Steps 1-7.

Step 10: Drink beer.
Was this helpful?
Thank you for voting!
Lost dishwasher brackets
78 of 118 people found this instruction helpful.
  • Judith from Essex, MA
  • Easy
  • 15 - 30 mins
  • Screw drivers
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Was this helpful?
Thank you for voting!
My filters had completely clogged up with hard deposits and food left on the dishes after running the dishwasher.
53 of 68 people found this instruction helpful.
  • Kathy from TECUMSEH, MO
  • Very Easy
  • Less than 15 mins
My filters had completely clogged up and had not cleaned my filters at all which was a no-no.I had lots of food left on the dishes after running my dishwasher, so I took bothp filters out and replaced them no tools required. I won’t be using powdered or liquid detergent for my dishwasher anymore only pods and promise to clean my filters once a month, so hopefully that’ll help keep them clean. Very easy replacement even for an old woman.
Was this helpful?
Thank you for voting!