All Installation Instructions for Tappan Range TEF326FBC

the oven wouldn't work, but the range elements did

it was an easy repair, and i thought it was the clock /timer, but it was the probe.

Parts Used:

Electronic Clock Assembly

clinton from Columbia, MO
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver

13 of 18 people found this instruction helpful.

Was this instruction helpful to you?

burner wouldnt heat

removed element , cut wires, conected wires,replaced element

Parts Used:

Terminal Block Kit

Doug from Ashton, IA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

11 of 13 people found this instruction helpful.

Was this instruction helpful to you?

Oven Racks needed to be replaced.

Slide out the old; slide in the new!

Parts Used:

Oven Rack

Peter from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Burner wouldn't stay hot.

I pulled out the old element and the new one just plugged right in.

Parts Used:

Surface Element - 8 Inch - 220V

Billy from Lovelady, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

11 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Enement was blew out.

I order the Element and received just in 4 days. It is Real incredible. I just opened the box and replaced the burners.

Parts Used:

Surface Element - 6 Inch

Chhabildas from Charlotte, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers

10 of 13 people found this instruction helpful.

Was this instruction helpful to you?

No LED read out and no function!

I tested incoming and outgoing voltage at the timer! The timer showed to be defected!

Parts Used:

Electronic Clock Assembly

Rick from mount airy, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Draw Glide Broken Off Bottom Drawer.

New part arrived, opened pkg. , Pulled drawer out. . . Snapped in new parts. . . . Done!! Saved myself $100. 00.

Parts Used:

Rear Drawer Glide

Kathleen from fall river, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Electrical connection pulled off the element

When I pulled the element out of the back panel of the oven to remove it, the electrical connection got caught on the edge of the hole in the panel and disappeared back into the oven insulation. It was difficult to find and pull it back out to reinstall it on the new element.

Parts Used:

Broil Element

Oven Bake Element

Carla S from WAYNESBURG, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set

10 of 14 people found this instruction helpful.

Was this instruction helpful to you?

Electric burner switch shorted out.

First I unpluggd the range and removed the back cover using a nut driver. Then I removed the knob by pulling (using a little force),Not very hard to do. I uscrewed two screws that hold the switch from the front of the range. Then I pulled the switch out about three inches and used pliers to disconnect the wires one at a time and connect them to the new switch. finally I finished the installation by reversing all the steps. Total time to install the switch took approximately 5(five) minutes.

Parts Used:

Infinite Burner Switch - Large Element

Armando G from Alice, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers

9 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Bake Element Stopped Working

When I found the part I needed there was an instructional video on how to remove broken bake element and install new bake element. This was the best video short and sweet and anyone...I mean ANYONE could do it!

Step 1- cut off the power supply (I flipped by breaker, but you could just unplug the oven)
Step 2- remove baking racks
Step 3- unscrew the little metal plates inside the oven where the bake element meets the back of the oven (reserve screws for new element)
Step 4- carefully pull the bake element out until you have the wires through the holes
Step 5- carefully pull the bake element from the wire clips on both sides
Step 6- take broken element out of over and put new one in
Step 7- slide new bake element ends onto wire clips
Step 8- slide new bake element and connected wires back though back of oven
Step 9- used saved screws to screw metal plates on bake element to the back of the oven
Step 10- replace oven racks
Step 11- restore power to range
Step 12- enjoy a working oven and feel like an absolute PRO for fixing it yourself!!!!

Parts Used:

Oven Bake Element

Meaghan from HOLLY HILL, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

replacement burner

Just a replacement burner for my stove. No tools needed. Thank you for such a speedy delivery

Parts Used:

Surface Element - 8 Inch - 220V

Donna from Westfield, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Large burner wouldn't heat

Removed back off of stove. Removed two screws that held in the switch, removed the wires that were connected to the switch and replaced the part.

Parts Used:

Infinite Burner Switch - Large Element

Phyllis from Elberon, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

15 of 31 people found this instruction helpful.

Was this instruction helpful to you?

broil element was bad.

It was a little difficult by my self an extra hand would of made it much easier.I unscrewed the screws pulled the wires from the back of the oven which took a few minutes.I am not great at fixing things but once I got the old one out it went smoother than I expected.it took about 25-30 minutes with an extra hand could have made it 10 minutes.not bad over all for me.did I mention not very handy.did stun the wife that I fixed it on my own.thanks Bill

Parts Used:

Broil Element

William from Fort Myers, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set

7 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Oven would not heat, broiler still worked.

I unplugged the stove for precautionary reasons.
I then removed the two screws holding element in place with the correct nutdriver.
I then carefully pulled out the element and pulled the two female spade connectors off.
I then compared to new element and plugged the new element in.
Finally I screwed in the new element and tested the oven.
It worked again!! I would recommend running the oven for a bit before placing anything in to bake. this allows burn off of stuff on the new element.

Parts Used:

Oven Bake Element