RF267ACBPXAA Samsung Refrigerator - Instructions

All Instructions for the RF267ACBPXAA
1 - 15 of 21

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Installation Video Incorrect
35 of 46 people found this instruction helpful.
  • Cheryl from PALATINE, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t he installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
Was this helpful?
Thank you for voting!
freezer was cold fridge was not
16 of 33 people found this instruction helpful.
  • theodore from PUEBLO, CO
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Took shelving out of freezer removed panel. Took second panel
out and removed motor. Whole repair took 45 minutes. Works perfect
Was this helpful?
Thank you for voting!
Door Mullion Spring broke
11 of 21 people found this instruction helpful.
  • Linda from OAKLEY, CA
  • Very Easy
  • Less than 15 mins
Went to You Tube and saw video on how to replace broken mullion spring. Ordered part online (more than one in case one broke -very cheap <$3.00 per part). Watched video twice and was able to follow instructions and insert spring correctly. Not difficult if you pay attention to details on how the spring must fit and which end goes wher e. The door works perfectly!
Was this helpful?
Thank you for voting!
spring in door mullion had broken
12 of 25 people found this instruction helpful.
  • Gary from TUPPER LAKE, NY
  • A Bit Difficult
  • 1- 2 hours
  • Pliers
There is a pretty good video about this on youtube, but complications arose nonetheless. The replacement spring supplied by Partselect is a bit different from the original in two ways. First, it is made of heavier-gauge wire; this is a good thing for durability, but it makes installation tougher. Second, the ends of the spring, which a re bent at right angles to the spring axis in order to fit into the plastic sleeves that hold the spring ends, are far too long. Once I figured this out, i snipped the ends down by a quarter inch or so, and they fit into the sleeves just fine after a certain amount of persuasion from needle-nose pliers. All things considered, it was a bit harder than it should have been, but the door works now, so all is well.
Was this helpful?
Thank you for voting!
Door flap would not close properly
3 of 3 people found this instruction helpful.
  • Jeffrey from EAST HARTFORD, CT
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Show how to fix it on YouTube so that helped a lot. I ordered a new spring gave all the correct information and the spring was too big that showed up
lol so had to go to Plan B an modified the broken spring lol works great now
Was this helpful?
Thank you for voting!
Original spring broke
3 of 3 people found this instruction helpful.
  • Bill from AUSTIN, TX
  • Really Easy
  • Less than 15 mins
Used a pair of needle nose pliers and replaced the spring.
Was this helpful?
Thank you for voting!
Door wouldn’t latch.
3 of 4 people found this instruction helpful.
  • Leslie from HARDIN, MT
  • Very Easy
  • Less than 15 mins
This company has everything!! One simple spring was all I needed. Fast shipping and product was exactly what they said I needed. Took me less than a minute to fix!! I’ll definitely shop here again!!
Was this helpful?
Thank you for voting!
Ice maker stopped making ice and made a repeating clicking sound
2 of 2 people found this instruction helpful.
  • Robert from AKRON, OH
  • Very Easy
  • Less than 15 mins
  • Screw drivers
YouTube the video on how to replace the ice maker. Unplugged the fridge, one screw was removed to open a small cover panel to access where the ice maker was plugged in, unplugged the ice maker, pushed a small locking clip and pulled the old ice maker off the keyhole slots holding it in place removing it from the fridge. Did the steps in r everse and reinstalled the new one. Plugged the fridge back in and reset the fridge by holding the energy saver and alarm button on the front door simultaneously for 8-10 seconds until it beeped. Took a few seconds and the fridge reset
Was this helpful?
Thank you for voting!
Flapper spring needed to be replaced on French door
2 of 2 people found this instruction helpful.
  • Sherrie from EXETER, PA
  • Really Easy
  • Less than 15 mins
  • Pliers
Used pliers to put new spring in place;
Time took about 3seconds and I’m a female. Video provided very helpful.
Was this helpful?
Thank you for voting!
Door would not close properly
2 of 3 people found this instruction helpful.
  • Deryl from KINGWOOD, TX
  • Really Easy
  • Less than 15 mins
Spent a dollar 1.97 on the spring.7.00 on shipping and fixed it in less than 5 minutes.Fantastic
Was this helpful?
Thank you for voting!
Broken spring on french door
2 of 3 people found this instruction helpful.
  • John from CADILLAC, MI
  • Really Easy
  • Less than 15 mins
  • Pliers
Placed lower spring leg in hole first. Manipulated upper spring leg into upper hole with needle nose pliers.
Was this helpful?
Thank you for voting!
Broken mullion spring on left door
2 of 3 people found this instruction helpful.
  • Dale from MACUNGIE, PA
  • Really Easy
  • Less than 15 mins
Placed one end of the new spring in left hole and used the needle nose pliers to insert the other end of the spring in the right hole.
Was this helpful?
Thank you for voting!
door spring
1 person found this instruction helpful.
  • Libor from Danbury, CT
  • Easy
  • Less than 15 mins
  • Pliers
replacing broken french door spring.
Was this helpful?
Thank you for voting!
Just follow instructions. Easy
2 of 4 people found this instruction helpful.
  • David from NORTHWOOD, NH
  • Really Easy
  • Less than 15 mins
  • Pliers
Held spring with needle nose pliers and slipped into place
Was this helpful?
Thank you for voting!
Bulb bracket broke
1 person found this instruction helpful.
  • Paul from BUENA PARK, CA
  • Really Easy
  • 30 - 60 mins
The website offered next day delivery on the 2 parts I needed. It was $30 dollars for next day but I wanted it fixed so I chose it. After a few days I revived no parts. I checked the website and saw the 2 parts were on back order, however they took my payment along with the $30 for next day delivery. Obviously I never got it next, or ever , so I cancelled the order. At least I got my money back.
Was this helpful?
Thank you for voting!
All Instructions for the RF267ACBPXAA
1 - 15 of 21