Models > PFSF6PKXCBB > Instructions

PFSF6PKXCBB General Electric Refrigerator - Instructions

All Instructions for the PFSF6PKXCBB
91 - 96 of 96
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water filter needed replacement
Removed the old filter. Filled the new one with water and put it in theplace of an old one. Flushed the system with 1 gallon of water.
Parts Used:
Refrigerator Ice and Water Filter
  • Natalia from Mount Pleasant, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Filter needed replacing
Folowed instructions
Parts Used:
Refrigerator Ice and Water Filter
  • W Craig from Diamondhead, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
replaced filter
none required
Parts Used:
Refrigerator Ice and Water Filter
  • donnie from metairie, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
on the french doors my granddaughter kept turning the inner seal bar when the door was open and when we went to close it it was in the wrong position and eventually the upper hinge broke
I took a small straight screw driver and popped the cap case off, removed old hinge and installed new hinge and snapped the cap back in place.. took all of 30 seconds
Parts Used:
French Door Hinge CAP CASE FRENCH
  • david from bridge city, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Evaporator freeze up
Pulled off the evaporator cover and replaced the Temp sensor.
Parts Used:
Assembly TEMP SENSOR
  • Peter from Homer Glen, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Flip lid was broken trying to force it open.
I removed the vegetable bins as well as the side panels holding the flip panel. I then tilted the left panel and slipped the side pins in their respective holes. This took some time as it was difficult getting the housing under the drawers to fit back into the side ledges. I was ready to call for a repair serviceman but was proud when the job was completed.
Parts Used:
Pantry Flip Lid Cover
  • Frank from San Diego, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PFSF6PKXCBB
91 - 96 of 96