PDW8680JS General Electric Dishwasher - Parts

This dishwasher retainer connects to the removable tine.

This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from falling when being pulled out too far.

This filter sits at the bottom of the dishwasher.

This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub nut, and it connects the lower spray arm to the hub. If the hub nut breaks, it can cause the spray arm to wobble during operation and this ...Read morecan result in a strange noise. To replace this part, first remove the spray arm by turning it counter clockwise, then do the same with the hub nut. Install the new hub nut by turning it counter clockwise, then replace the lower spray arm. This part is sold individually and is an OEM part from the manufacturer.

This part allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.

This part releases the detergent and rinse aid into the dishwasher.

This is the upper spray arm bearing for your dishwasher. The spray arm fits onto the spray arm bearing, which allows it to spin during the cycle. If your dishwasher is not cleaning dishes properly, or is making a lot of noise during operation, it could be the result of a damaged spray arm bearing. This part is made of white plastic and is...Read more approximately 1 inch long and 1/2 inch wide. This part is sold individually and is a genuine OEM part from the manufacturer.

This part is a replacement lower spray arm bearing for your dishwasher. It is made of gray plastic and is approximately ½ inch in diameter. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or the dishwasher is noisy during op...Read moreeration, you may need to replace the spray arm bearing. This is a bearing for the middle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.

This lower rack fits into your GE dishwasher and holds your dishes securely during the wash. If your current rack is rusty, hard to slide, or has broken tines, this replacement can help your dishwasher clean better and run more smoothly. Some newer versions come with improved wheels that stay in place and glide easily.

Aids in the opening and closing of the dishwasher door.

Aides with movement or sliding of the dishrack.

This part is the replacement side trim gasket for your dishwasher. It is black in color and is approximately 24 inches long and 1 inch wide. The gasket runs along the side of your dishwasher, between the dishwasher and the cabinet. It is used for aesthetic purposes, and also as a sound curtain. The main reason you would want to replace th...Read moree door seal is if it is torn or missing. You will need a Phillips-head screwdriver to remove the dishwasher from the cabinet for this repair. This part is sold individually and is an OEM part from the manufacturer.