PDW8200NB General Electric Dishwasher - Parts

This is a replacement spring plunger for your dishwasher. The spring is approximately 1 inch in length and is sold individually. The spring plunger helps your door latch correctly, and if the spring is missing or damaged, you can experience a door latch failure, and your dishwasher may not start. This is an OEM part sourced directly from the manufacturer.

Aids in the opening and closing of the dishwasher door.

Aides with movement or sliding of the dishrack.

This part is a replacement middle spray arm bearing for your dishwasher. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or is noisy during operation, you may need to replace the spray arm bearing. This is a bearing for the ...Read moremiddle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.

This part is the replacement side trim gasket for your dishwasher. It is black in color and is approximately 24 inches long and 1 inch wide. The gasket runs along the side of your dishwasher, between the dishwasher and the cabinet. It is used for aesthetic purposes, and also as a sound curtain. The main reason you would want to replace th...Read moree door seal is if it is torn or missing. You will need a Phillips-head screwdriver to remove the dishwasher from the cabinet for this repair. This part is sold individually and is an OEM part from the manufacturer.

This part is the upper spray arm for your dishwasher. It is made of gray plastic and is approximately 11 inches wide. The upper spray arm is mounted to the top of the dishwasher tub and rotates during the cycle to ensure that your dishes are washed evenly. If your spray arm is clogged or damaged, your dishes may not clean evenly, and you ...Read morewill need to replace the spray arm. To access the spray arm, you will need to remove the top dish rack, then simply unscrew the old arm. Screw the replacement arm in and replace the dish rack to complete the repair.

The pump ejects the water from the dishwasher.

This works in conjunction with the pump and filtration system. It is used to filter the drainage for disposal.

Also known as Upper Wash Supply Tube. This part brings water from your main water line the wash arms.