- Home
- MVWB835DC5
- Instructions
MVWB835DC5 Maytag Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer hoses due for replacement
3 of 5 people
found this instruction helpful.
-
James from PINE MOUNTAIN, GA
- Easy
- 30 - 60 mins
Replaced each hose. Did discover that either hose can be used for hot or cold water lines. No longer required to label hot and cold replacement hoses.
Was this helpful?
Thank you for voting!
Non agitator pulsating action ceased
2 of 3 people
found this instruction helpful.
-
David from LAKEWOOD, CA
- Really Easy
- 30 - 60 mins
-
Socket set
Ordered the parts and followed You Tube DYI clip. This 3YOMaytag top loading washer has had a motherboard replaced and now this. It all works fine for now, I cannot imagine what the appliance tech would have charged. Maytag is not what it used to be.
Other Parts Used:
Was this helpful?
Thank you for voting!
washer plate would not agitate
1 person
found this instruction helpful.
-
William from LANCASTER, SC
- Really Easy
- 30 - 60 mins
-
Socket set
after watching a video i ordered the part. removed the old part and installed the new wash plate using a socket and ratchet.
now washer works like new
now washer works like new
Was this helpful?
Thank you for voting!
Sides of washer dented out
1 person
found this instruction helpful.
-
Robert from East Northport, NY
- Very Easy
- 30 - 60 mins
-
Nutdriver
Replaced Suspension rods removed 3 screws on back of washer, lifted the top, Removed suspension rods and and replaced all 4 on drum.
Was this helpful?
Thank you for voting!
Door alignment
2 of 4 people
found this instruction helpful.
-
Amy from INMAN, SC
- Really Easy
- 30 - 60 mins
I was sent the wrong part , when I questioned them said they did not have it so was directed to Whirlpool and they are making it and I might get it in May
Was this helpful?
Thank you for voting!
The wash plate hub teeth were worn out so there wasn’t any agitation to wash the clothes.
1 person
found this instruction helpful.
-
THOMAS from LANSDALE, PA
- A Bit Difficult
- 1- 2 hours
-
Screw drivers, Socket set
I removed the cap and then undid the bolt. The bolt was difficult to remove I guess because it was I there so long and is a critical part. Once I had the bolt out I used a strap to get under the plate to pry up. Once it was off I checked the drive hub kit and found that it didn’t need to be replaced. I pit the new wash plate in place a
... Read more
nd used a rubber mallet to help seat it once I knew the teeth were lined up. The bolt went back in easily and I replaced the cap!
Read less
Was this helpful?
Thank you for voting!
the impellar mechanism wore out so stopped aggitating
3 of 8 people
found this instruction helpful.
-
Stephanie from INDEPENDENCE, KY
- Really Easy
- 30 - 60 mins
-
Socket set
Popped the cap , used a socket to unscrew the bolt (it was stripped so ended up having to cut off bolt) Took off old impellar and replaced, installed a new bolt, replaced Cap and it was fixed.
Was this helpful?
Thank you for voting!
Replace drain hose
3 of 11 people
found this instruction helpful.
-
Brian from DREXEL HILL, PA
- Easy
- 30 - 60 mins
-
Pliers
At first I had to position the washer so I could get access.. after having it positioned, I figured it out. Getting the clamp fastened, I was done.
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people
found this instruction helpful.
-
Howard from Boynton Beach, FL
- Easy
- 30 - 60 mins
-
Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read more
oring refer handles. Thank you
Read less
Was this helpful?
Thank you for voting!