LRSC21935SW LG Refrigerator - Instructions

All Instructions for the LRSC21935SW
46 - 48 of 48

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice tray was bent and spilling water onto ice making it freeze
  • William from Nolensville, TN
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I took the ice out with one screw and took out the old tray the new one slipped right in and I hooked up the little heat strip with one snap works perfect cost $10 I was told by appliance repair tech that I needed to replace the ice maker for $450 saved $440 dollars replacing the bent or warped ice tray
Was this helpful?
Thank you for voting!
Threads were striped on water valve leaked needed new one
  • Nicholas from Melborne, FL
  • Easy
  • 30 - 60 mins
  • Screw drivers, Wrench set
Shut water valve off drained water in refrigerator instAlled new valve
Was this helpful?
Thank you for voting!
Each time we've had to move we have to remove the doors from the fridge to get it thru the front door.since water and ice run thru the freezer door there are 2 tubes that connect at the bottom of the freezer door that aren't meant to be separated very often if ever.it's easier to cut the tubing on b
  • Sarah from Elk Grove, CA
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers
With alot of elbow grease and a pair of pliars we managed to get the old connector off wo cuttig the tubing as the tubing was getting to short from being cut once to many times & there was no more play in the length.Original connector was a different color and shapped slightly different than the new one so was a bit concerned that I had ordered the wrong part but it went one very easily & did not leak. We even managed to remove it again just to see if it was possible wo cutting again. it came off with no trouble.I would say the replacement part was a better fit than the original simply because we could remove it easily wo having to cut the tube!
Was this helpful?
Thank you for voting!
All Instructions for the LRSC21935SW
46 - 48 of 48