Models > LRFD25850SW > Instructions

LRFD25850SW (ASWCLGA) LG Refrigerator - Instructions

All Instructions for the LRFD25850SW
76 - 90 of 101
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
I recently cleaned my sister's lg fridge and broke a crisper drawer
My sis is disabled and not able to to house work, so I helped out by taking apart the LG fridge to clean it and broke a crisper drawer front. I ordered the part about 2 PM on Wenesday and the part was delivered before 11 AM. It took all of one minute to fix and boy was she happy. Thanks for being so efficent and responisve.
Parts Used:
Crisper Drawer Front
  • John from Apopka, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken Crisper Drawer Door Holder Clip (Small Plastic Hinge On Door Required New Door To Fix)
I actually glued the item the first time repair was needed - lasted over one year. After it broke again; ordered the part from lg on line; and three days later the part arrived and repair complete. Also, I bought an extra door should the other crisper door fail. These doors and other small white plastic parts are seemingly prone to breakage. I am not rough on my appliances, yet I have had one or two other failues of interior parts. Very happy with lg, nevertheless.
Parts Used:
Crisper Drawer Front
  • Thomas from Olympia, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
crisper drawer door broke
Just searched online, found PartSelect, ordered the part, replaced it. Perfect
Parts Used:
Crisper Drawer Front
  • Gary from Olympia, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Cracked lower shelf frame
Very easy...just remove fruit/vegetable baskets, remove glass shelf and frame, Unscrew the 3 screws that hold in the metal rod from the old one and re-install it in new shelf frame. Voila. I was going to have to wait 2 weeks for a service call and then who knows how long while they ordered the part. Took care of it myself in 3 days - fast, reasonable shipping and part cost. Thank you!
Parts Used:
Lower Shelf Frame - White
  • Lisa from San Anselmo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replaced broken/cracked lower Shelf Frame
I did it myself and the refrigerator looks like new.
Parts Used:
SUPPORTER,COVER TV Crisper Drawer Front Lower Shelf Frame - White
  • Oliver from Fair Lawn, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
not a problem
snap it on!
Parts Used:
Crisper Drawer Front
  • LORI from INDIANAPOLIS, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken plastic drawer and crisper front
1. Removed old, broken parts 2. Insert new ones
Parts Used:
BUCKET ASSEMBLY,ICE Crisper Drawer Front
  • William from Burlington, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Tray Cover was broken where it attaches to the refrig. This is the Third one in 6 years
The plastic is real weak and the articulation point is not manufactured strong. You have to put one end in a female receiver and flex the tray cover with your fingers crossed hoping it won't snap, while sliding the other side into a similar female receiver on the other side. The Crisper drawer front has not come in yet. Disappointed that you have to buy the entire drawer with a front instead of the front. This is the 2nd one I have replaced. The difference in the Drawer Front...$10.00 and then entire Front and Drawer, $45 plus...
Parts Used:
Tray Cover Crisper Drawer Front
  • Phillip from knoxville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken tab on hinge of drawer crisper
Replace the drawer crisper
Parts Used:
Crisper Drawer Front
  • Jim from Indian Harbour Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Plastic door latch/ cam shaft broke on left side door
Removed white plastic trim and installed new latch / cam shaft
Parts Used:
Cam,Shaft Refrigerator Camshaft
  • Reginald A. Green from Pelham, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Crisper Drawer broke on right hinge
Replacement part from PartSelect was OEM, identical to original part. Installation was very quick. Inserted hinge on left side and then depressed the right side to slip it into place. Presto, it was done. Most impressed with PartSelect on the OEM replacement part and very prompt delivery.
Parts Used:
Crisper Drawer Front
  • Kevin from Reno, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Freezer door handle broke.
The repair was not difficult. The real positive was your web site, the ease of finding the right part, simple to order, and on time delivery. Thanks.
Parts Used:
Handle Assembly,Freezer
  • Bill from Potosi, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
door mounted cold water tank was leaking at seam of polyethylene tank.
The part labeled as water tank was not pictured on web site, and when it arrived it was a large coil of plastic tubing wire-tied in an oval shape,not a blown p/e tank as original.The oval of tubing would not fit into the door compartment, because of the bulk of the actuating solenoid. No instructions were included. It was necessary to hacksaw the steel solenoid mounting bracket off the solenoid, then contort the solenoid into the compartment to get all parts inside the cover. new connectors had to be purchased, because the the tank/tubing coil was 1/4" od, while the original tank had 5/16"od connections.
Parts Used:
Water Tube
  • RONALD from LAKE WALES, FL
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken shelf frame
Removed two drawers and drawer covers, glass shelf and door frame. Replaced in reverse order.
Parts Used:
Lower Shelf Frame - White
  • Robert from Hackettstown, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken
easy and quickly Thank you for your prompt delivery and excellant service
Parts Used:
Crisper Drawer Front
  • Phyllis from Bocca Raton, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the LRFD25850SW
76 - 90 of 101
Back to Top