LPR1115ADW Admiral Range - Instructions

All Instructions for the LPR1115ADW
16 - 30 of 37

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I needed a broiler pan
4 of 9 people found this instruction helpful.
  • Rhoda P. from Secaucus, NJ
  • Really Easy
  • Less than 15 mins
I took the broiler pan out of the shipping container and put it in the oven.
Was this helpful?
Thank you for voting!
rusty drip trays
2 of 3 people found this instruction helpful.
  • Pam from Grand Ledge, MI
  • Really Easy
  • Less than 15 mins
finally after years of searching for trays of this size with no luck in local stores, I was able to find and purchase 2 sets, one set for my daughter, which we were able to put in place to clean up our stoves and make them more appealing . Thank-you for your prompt service.
Was this helpful?
Thank you for voting!
Range burner drip pans were rusted and old
3 of 6 people found this instruction helpful.
  • Billye from San Antonio, TX
  • Really Easy
  • 15 - 30 mins
The repair was super simple, just remove the drip pan and place new one.
The hard part was finding the drip pan for such an old model appliance. I had shopped locally here in San Antonio with no luck.
I was very happy to find them (exact match) at Part Select and the price was very reasonable. I'll use Part select in the fu ture for needed parts.
Was this helpful?
Thank you for voting!
My original back leg broke because the floor is uneven. Had to pull it out several times.
1 person found this instruction helpful.
  • Phyllis from BROWNVILLE, NY
  • Really Easy
  • Less than 15 mins
  • Wrench (Adjustable)
Put the back of stove on blocks of wood to get high enough to screw the new leg in.
Was this helpful?
Thank you for voting!
My oven door seal had dried rotted
1 person found this instruction helpful.
  • Anita from ELKTON, VA
  • Really Easy
  • 15 - 30 mins
  • Pliers
I took pliers to get the old one off, and popped the new one back in its place, and it fit perfect.
Was this helpful?
Thank you for voting!
The oven bottom was warped and could not be positioned properly in the oven.
1 person found this instruction helpful.
  • Tara from ALBANY, NY
  • Easy
  • 15 - 30 mins
Removing the old oven bottom was easy...as it was already outside of its slots. Installing the new one was pretty easy. I placed the oven bottom in the front slots first...then the rear slots...no tools necessary.
Was this helpful?
Thank you for voting!
Old seal breaking off oven door. Oven not baking food well, wasting heat and fuel.
1 person found this instruction helpful.
  • Mz from COLUMBIA, ME
  • Very Easy
  • Less than 15 mins
  • Pliers
Used pliers to remove clips and old seal. Snap in new seal. DONE! Less than 5 mins.
Was this helpful?
Thank you for voting!
Drip pans were rusted. I had shopped for replacements at local appliance stores without finding them.
1 of 2 people found this instruction helpful.
  • Norma J from Philadelphia, PA
  • Really Easy
  • Less than 15 mins
Removed the rusted drip pans and replaced them with the new pans. Range looks great and ready for many more years of use!
Was this helpful?
Thank you for voting!
Old and corroded drip pans
1 of 2 people found this instruction helpful.
  • Veronica from Miami Beach, FL
  • Really Easy
  • Less than 15 mins
Furtunately, it was just a replacement of the drip pans. It changed the entite looks of my range for under $ 25.00 dollars. Very satisfied!
Was this helpful?
Thank you for voting!
Thermostat bulb was hanging loose
2 of 5 people found this instruction helpful.
  • Willi from Old Saybrook, CT
  • Really Easy
  • Less than 15 mins
  • Pliers
Removed what was left of the original clips. Pressed in the new clips and snapped in the themostat blub
Was this helpful?
Thank you for voting!
The floor panel of the oven was pocked and in bad shape
2 of 6 people found this instruction helpful.
  • Roger from San Juan Capistrano, CA
  • Really Easy
  • Less than 15 mins
I found the panel on the innernet, ordered it and when it arrived I removed the old one and replaced it with the new one.
Was this helpful?
Thank you for voting!
thermostat temprature bulb hanger clips
1 of 4 people found this instruction helpful.
  • Dwayne from Atlanta, GA
  • Really Easy
  • Less than 15 mins
snaped them into oven cavity attached temp bulb job complete
Was this helpful?
Thank you for voting!
Rubber seal was broken
  • Jennifer from Lynn, MA
  • Really Easy
  • Less than 15 mins
  • Pliers
Broke the same day I installed it
Was this helpful?
Thank you for voting!
As easy as it could be
  • Phillip from Twentynine Palms, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
I have worked in maintenance field most of my adult life and all aspects and to change the oven door gasket was no challenge what so ever. It took longer to find my needle nose pliers to remove the old gasket clips and then re-install the new gasket. Maybe 10 minutes total
Was this helpful?
Thank you for voting!
Door seal was pulled out by grandson.
  • Michael P from Hickory Hills, IL
  • Really Easy
  • Less than 15 mins
  • Pliers
finished removing door seal, used pliers to remove old securing studs. positioned new seal and pushed securing studs into existing holes and was done.
Was this helpful?
Thank you for voting!
All Instructions for the LPR1115ADW
16 - 30 of 37