LFX29937ST (ASTCNA0) LG Refrigerator - Instructions

All Instructions for the LFX29937ST
16 - 30 of 43

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Icing up in the freezer due to poor gasket
2 of 2 people found this instruction helpful.
  • Maryann from BROOKFIELD, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched a couple of YouTube videos and then went at it
Was this helpful?
Thank you for voting!
Replaced hose and it was exactly what I needed.
3 of 5 people found this instruction helpful.
  • Donald from CLEBURNE, TX
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Replaced old hose and installed the new one. Was very simple with the instructions in your email..... step by step, could not of been any similar.... you guys rock
Was this helpful?
Thank you for voting!
Roller on rail broke off
2 of 2 people found this instruction helpful.
  • David from NAPERVILLE, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers
easy repair. First step is you need to remove all food from bottom shelf and remove all three produce drawers. Then remove the meat drawer. You will need to lift the bottom self off the rail to remove. It is not heavy and does not need to be fully taken out of fridge - easier if you do but some what hard to get out.Unscrew the rail and un plug the old rail. Clean off the fridge - my fridge was gross behind the rail. Insert the rail into the fridge and then screw in the two screws. Place the bottom self back on the two rails and you are done.
Was this helpful?
Thank you for voting!
Glass shelf broke during cleaning
2 of 3 people found this instruction helpful.
  • Barbara from HAMILTON, NJ
  • Really Easy
  • 30 - 60 mins
Very easy. Just slipped it back into place
Was this helpful?
Thank you for voting!
The Ice maker stopped working
2 of 4 people found this instruction helpful.
  • Joseph from SAINT LOUIS, MO
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Thanks to videos on You-Tube which showed step by step removal and replacement. It was a simple process. only thing missing on the video was information on the green ground wire.
Was this helpful?
Thank you for voting!
The hose that feeds the Ice Maker broke,right where it goes in the Fridge.
2 of 4 people found this instruction helpful.
  • William from BOWDOINHAM, ME
  • Easy
  • 1- 2 hours
  • Screw drivers, Socket set
I actually didn't use what I got. Because there was all kinds of tubing coiled up in the door. We just fed the exsess all the way through the Fridge,and Bingo! It was done.
Was this helpful?
Thank you for voting!
Broken door basket
2 of 4 people found this instruction helpful.
  • William from LARGO, FL
  • Very Easy
  • Less than 15 mins
The repair was an easy replacement. The problem was the LG part was no longer available from LG or any of the other places I tried. The PartSelect customer service representative was a true professional and did an outstanding job of helping find the correct part (LG's diagram was unreadable) and cross-referenced it to find the the part th at PartSelect actually had in stock. I had the part in four day. The best customer service I have had in years. I lost his name but the order was 13449146. He deserves a raise!
Was this helpful?
Thank you for voting!
Ordering the right parts
4 of 10 people found this instruction helpful.
  • Kip from RICHMOND, VA
  • Very Easy
  • Less than 15 mins
I ordered the needed parts, the correct ones I thought, but when they arrived, I realized they were the wrong parts shipped to me. The reason the wrong parts were shipped to me was because PartsSelect failed to advise me there were none of the parts I needed available so they shipped the left hand basket assembly, door, versus the desire d right hand basket assembly, door. I then had to return the wrong parts shipped to me, at my cost of ~$25, and await a refund for the wrong parts originally shipped to me. That's how I did the repair.
Was this helpful?
Thank you for voting!
Freezer door gasket formed gaps between door and refrigerator.
1 person found this instruction helpful.
  • Cheryl from Ormond Beach, FL
  • Really Easy
  • 15 - 30 mins
Removed old gasket from the door and replaced with new gasket.
Was this helpful?
Thank you for voting!
The overlay control Panay was broken at the bottom
1 person found this instruction helpful.
  • Daniel from JACKSONVILLE, FL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
We pryed the ice dispenser housing out unscrewed the overlay from the relay board and then reversed the process to put it back in time consuming but went slow as not to brake tabs or crack housing
Was this helpful?
Thank you for voting!
Replaced cracked refrigerator door shelvers
1 person found this instruction helpful.
  • Larry from SANTA ROSA, CA
  • Very Easy
  • Less than 15 mins
Slid the replacement shelves into place.
Was this helpful?
Thank you for voting!
The door bin cracked and broke.
1 person found this instruction helpful.
  • Elizabeth from Huntington Beach, CA
  • Very Easy
  • Less than 15 mins
I just popped out the broken bin and slid the new one into the slots on the door.

The fix was easy. I appreciate the expert advice on which part to purchase, as that was difficult to figure out. I received a prompt response to my question and the replacement part came quickly.
Was this helpful?
Thank you for voting!
My glass shelf shattered after I had taken it out to clean it
1 person found this instruction helpful.
  • Rachel from SAN MATEO, CA
  • Really Easy
  • Less than 15 mins
Inserted the new shelf
Was this helpful?
Thank you for voting!
Freezer door gasket needed replacing.
1 person found this instruction helpful.
  • Stephen from DICKINSON, TX
  • Really Easy
  • Less than 15 mins
  • Pliers
Simply removed old gasket. Started in a corner with installing the new gasket. It went in easily and quickly.
Was this helpful?
Thank you for voting!
old gasket was damaged
1 of 2 people found this instruction helpful.
  • Maria from TEQUESTA, FL
  • Really Easy
  • Less than 15 mins
i removed old and installed new gasket in 5 minutes. i watched a video. it was super easy .
Was this helpful?
Thank you for voting!
All Instructions for the LFX29937ST
16 - 30 of 43