Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 peoplefound this instruction helpful.
Frank from Palm Coast, FL
Easy
15 - 30 mins
Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver.
... Read moreConnect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Read less
Was this helpful?
Thank you for voting!
door of oven came apart when plastic screw holders broke
1 of 2 peoplefound this instruction helpful.
patricia from chipely, FL
Really Easy
15 - 30 mins
Screw drivers
put back together with parts ordered. Parts arrived in 2 days!!!! and saved my large dinner party the following day from being ruined. Thank you so much for your parts inventory and for Jenn Air supplying only the part needed and not the entire door. It was a life saver!
Was this helpful?
Thank you for voting!
oven would not heat
1 of 2 peoplefound this instruction helpful.
francis from YORK, PA
Very Easy
15 - 30 mins
Nutdriver
The instructions given on this website were more than adequate, even though the element had been updated and now has only 1 point to screw down
Was this helpful?
Thank you for voting!
wire came loose and shorted out
1 of 2 peoplefound this instruction helpful.
Elizabeth from HOUSTON, TX
Really Easy
30 - 60 mins
Pliers, Screw drivers
Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.
Was this helpful?
Thank you for voting!
Block broke
1 of 4 peoplefound this instruction helpful.
Edward from Crimora, VA
Really Easy
15 - 30 mins
Screw drivers, Socket set
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
Was this helpful?
Thank you for voting!
black scratchers from wheel chair
3 of 12 peoplefound this instruction helpful.
Linda from GLEN CARBON, IL
Very Easy
30 - 60 mins
shook bottle and painted waited a day and repeated
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read moreoring refer handles. Thank you
Read less
Was this helpful?
Thank you for voting!
range installer broke a screw off & busted the plastic piece
Christina from West Des Moines, IA
Easy
30 - 60 mins
Pliers, Screw drivers
Had to screw off old terminal block & screw on new one
Was this helpful?
Thank you for voting!
circuit breaker blew
Richard from Sarasota, FL
Easy
Less than 15 mins
Pliers, Screw drivers
I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in abo
... Read moreut 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.
My Orders
