Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fan not spinning and heating was uneven
2 of 2 peoplefound this instruction helpful.
Susan from Oshkosh, WI
Easy
30 - 60 mins
Screw drivers
After part arrived I removed fan casing from the inside, then slid the range out and unplugged it. I unscrewed part from the back and put in the new part. Plugged range, turned on convection to test and it works properly now! Fan spins smoothly!
Was this helpful?
Thank you for voting!
Foolishly melted a plastic cutting board at a high temperature while baking bread which dripped over two two racks and puddled on the bottom pan.
2 of 2 peoplefound this instruction helpful.
Barbara from MORROW, OH
Really Easy
Less than 15 mins
Screw drivers
The repair was very easy, though expensive. Just slid in the racks and installed new bottom with only two screws to remove and replace after setting the bottom pan in place..
After watching the video, I said to my wife that this is a simple installation. However, I’m looking at the screws, I did not have the correct screwdriver to remove the screws. I had to go out and buy that. After that, it was not a problem.
2 of 3 peoplefound this instruction helpful.
Tom from THE VILLAGES, FL
Easy
15 - 30 mins
Nutdriver
I first shut off the breaker, then, after pulling the stove away from the wall, I unplugged it. I removed the two screws in the back of the stove which came off easily. I removed the two screws inside the oven and removed the bottom plate. I noticed the heating element I was changing had braces along the bottom. I had to remove the two s
... Read morecrews and removed the burnt out element. The new element did not have the braces the original element had, but it fit in perfectly. Then I replaced all the screws, plugged it in and turned on the breaker and it worked. The only thing that we noticed is there’s a clicking sound every time the temperature increases. Not sure what that is.
Read less
Was this helpful?
Thank you for voting!
screw came off
1 personfound this instruction helpful.
Sandeep from EDINA, MN
Very Easy
Less than 15 mins
Screw drivers
very expensive to buy the part but just tighten the screw intot eh predefined place.
Was this helpful?
Thank you for voting!
Bake element burned out
1 personfound this instruction helpful.
lou ann from MARTINSBURG, WV
Very Easy
15 - 30 mins
Screw drivers
There is a good video on YouTube that shows exactly how to replace the bake element. Had mine fixed in 15 to 20 minutes. Saved me about $150 by not having to call repairman.
Was this helpful?
Thank you for voting!
Lower element shorted out
1 personfound this instruction helpful.
Stuart from CHARLES TOWN, WV
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Followed the video on this site.
Was this helpful?
Thank you for voting!
Convection fan replacement
1 personfound this instruction helpful.
Rick from Roseburg, OR
A Bit Difficult
1- 2 hours
Screw drivers, Wrench set
Remove the range door. Look on YouTube. Remove 4 screws holding on the fan cover at the rear wall of the range. (This was a slide in range and I could not get to the back without a lot of extra work.) Remove the 3 screws holding the fan in place. Be care and handle the fan gently. Remove the fan by moving outward slightly. Be very
... Read morecareful of the electrical connections on the back of the fan. There are 4. Tilt the assembly out from the top a couple of inches. Slide off the two wires to the heating element, lower the assembly down while keeping the bottom close to the range back wall. Slide off the two connection fan wires on the bottom. Be careful and do not over stress this plastic harness wire connection, it will break. Remove fan. Put the new one on. First slide on the harness connection at the bottom while holding the bottom of the fan close to the range back wall. Rotate up and hook the two element wires. Put the screws back in for the fan and cover. This is very sensitive work. Take you time.
Read less
Was this helpful?
Thank you for voting!
Oven heated really slow, no heat from the bottom of the oven
1 personfound this instruction helpful.
tim from KEENE, NH
Really Easy
30 - 60 mins
Pliers, Screw drivers
Very easy followed instructions from a youtube video.
Was this helpful?
Thank you for voting!
Glass on oven door broke
2 of 4 peoplefound this instruction helpful.
Robert from EAST SANDWICH, MA
Really Easy
30 - 60 mins
Screw drivers
Toke the oven door off disassembly door and replaced outer panel and glass
The parts I used worked great, my issue is the parts I need to return.
1 personfound this instruction helpful.
John from CONCORD, VA
Really Easy
30 - 60 mins
Screw drivers
I have tried to call, but NO-ONE answers the phone. I have sent emails, but all I get is an automated response telling me to go to the web site. Partselect is the worst company I have ever dealt with, I need to return about $100 in parts and I cannot get an automated return form or someone on the phone. I will NEVER do business with
... Read morethem or recommend them to anyone. In a nutshell they SUCK as a company.
The oven's lower heating element needed replacement
1 personfound this instruction helpful.
Assad from PARKER, CO
Really Easy
30 - 60 mins
Screw drivers
Watched the video and realized this was something I could do myself...bear in mind I'm not exactly a handyman! Took me about 30min as the oven also needed some cleaning...my tenant definitely needs to use the self-cleaning!
I have to note, although the heating element was covered by Maytag's 10yr limited parts warranty, I deci
... Read moreded to purchase from PartSelect since Maytag could not provide a ship date and I couldn't keep my tenant waiting! Supposedly Maytag had the part in stock but their warehouse was behind because of the pandemic...what a lame excuse! Almost a month later, Maytag has yet to ship the part! Needless to say, am very disappointed in Maytag's after sales and warranty program! I get the impression, they just wanted to pressure me to buy the new part!
Lastly, was very pleased and impressed by PartSelect's customer service! Their website was very easy to use, less expensive than buying direct from Maytag and the part was shipped same day! Thank you PartSelect!
Read less
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 peoplefound this instruction helpful.
RAYMOND from JACKSONVILLE, FL
Really Easy
Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
heating element
1 of 2 peoplefound this instruction helpful.
Victoria from NASHVILLE, TN
Very Easy
Less than 15 mins
Screw drivers
screwed it in the oven and it worked.
Was this helpful?
Thank you for voting!
cleaner
2 of 5 peoplefound this instruction helpful.
Mary from Duarte, CA
Really Easy
Less than 15 mins
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you
Was this helpful?
Thank you for voting!
Needed to replace over door gasket
2 of 5 peoplefound this instruction helpful.
Genie from Conshohocken, PA
Really Easy
Less than 15 mins
Pliers
Very Simple, I recommend pulling the old gasket in sections, and popping the new gasket metal holders in the holes as you go. You can't mess it up. For the ends, I tucked them in using a pair of needle nose pliers, but any small slender tool, such as a thin screwdriver, will work.
My Orders
