Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cartridge was old and worn out.
2 of 3 peoplefound this instruction helpful.
Myron from Norwalk, CT
Really Easy
Less than 15 mins
Pulled out the old one, pluged in the new one. It took me longer to open the box! PartSelect made it so easy to order and the shipping was super fast and at low cost. I looked on ebay and saw people paying more (with shipping and handling) for used parts. Thank you PartSelect!
Was this helpful?
Thank you for voting!
After watching the video, I said to my wife that this is a simple installation. However, I’m looking at the screws, I did not have the correct screwdriver to remove the screws. I had to go out and buy that. After that, it was not a problem.
2 of 3 peoplefound this instruction helpful.
Tom from THE VILLAGES, FL
Easy
15 - 30 mins
Nutdriver
I first shut off the breaker, then, after pulling the stove away from the wall, I unplugged it. I removed the two screws in the back of the stove which came off easily. I removed the two screws inside the oven and removed the bottom plate. I noticed the heating element I was changing had braces along the bottom. I had to remove the two s
... Read morecrews and removed the burnt out element. The new element did not have the braces the original element had, but it fit in perfectly. Then I replaced all the screws, plugged it in and turned on the breaker and it worked. The only thing that we noticed is there’s a clicking sound every time the temperature increases. Not sure what that is.
Read less
Was this helpful?
Thank you for voting!
Bake element burned out
1 personfound this instruction helpful.
lou ann from MARTINSBURG, WV
Very Easy
15 - 30 mins
Screw drivers
There is a good video on YouTube that shows exactly how to replace the bake element. Had mine fixed in 15 to 20 minutes. Saved me about $150 by not having to call repairman.
Was this helpful?
Thank you for voting!
Lower element shorted out
1 personfound this instruction helpful.
Stuart from CHARLES TOWN, WV
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Followed the video on this site.
Was this helpful?
Thank you for voting!
Glass on oven door broke
2 of 4 peoplefound this instruction helpful.
Robert from EAST SANDWICH, MA
Really Easy
30 - 60 mins
Screw drivers
Toke the oven door off disassembly door and replaced outer panel and glass
The parts I used worked great, my issue is the parts I need to return.
1 personfound this instruction helpful.
John from CONCORD, VA
Really Easy
30 - 60 mins
Screw drivers
I have tried to call, but NO-ONE answers the phone. I have sent emails, but all I get is an automated response telling me to go to the web site. Partselect is the worst company I have ever dealt with, I need to return about $100 in parts and I cannot get an automated return form or someone on the phone. I will NEVER do business with
... Read morethem or recommend them to anyone. In a nutshell they SUCK as a company.
The oven's lower heating element needed replacement
1 personfound this instruction helpful.
Assad from PARKER, CO
Really Easy
30 - 60 mins
Screw drivers
Watched the video and realized this was something I could do myself...bear in mind I'm not exactly a handyman! Took me about 30min as the oven also needed some cleaning...my tenant definitely needs to use the self-cleaning!
I have to note, although the heating element was covered by Maytag's 10yr limited parts warranty, I deci
... Read moreded to purchase from PartSelect since Maytag could not provide a ship date and I couldn't keep my tenant waiting! Supposedly Maytag had the part in stock but their warehouse was behind because of the pandemic...what a lame excuse! Almost a month later, Maytag has yet to ship the part! Needless to say, am very disappointed in Maytag's after sales and warranty program! I get the impression, they just wanted to pressure me to buy the new part!
Lastly, was very pleased and impressed by PartSelect's customer service! Their website was very easy to use, less expensive than buying direct from Maytag and the part was shipped same day! Thank you PartSelect!
Read less
Was this helpful?
Thank you for voting!
Oven heated really slow, no heat from the bottom of the oven
1 personfound this instruction helpful.
tim from KEENE, NH
Really Easy
30 - 60 mins
Pliers, Screw drivers
Very easy followed instructions from a youtube video.
Was this helpful?
Thank you for voting!
Code F8E0
1 personfound this instruction helpful.
Herman from Dublin, GA
Very Easy
30 - 60 mins
Screw drivers
I watched then followed the video. I could not remove the top, so I used a can from the cabinet to support and hold the top. That gave me enough room to get the old fan out and the new fan in. Thank you PartsSelect.
Was this helpful?
Thank you for voting!
None
1 personfound this instruction helpful.
Shirley from CALLAHAN, CA
Very Easy
Less than 15 mins
Just slipped the part into the electric outlet
Was this helpful?
Thank you for voting!
One of the burners in one of the glass ceramic cooktops stopped working.
1 personfound this instruction helpful.
Lynn from ARVADA, CO
Very Easy
Less than 15 mins
I first thought it was the switch. I ordered one and the wrong one was shipped to me FROM ANOTHER COMPANY. After more trouble shooting I discovered it was the cartridge that needed to be replaces. I ordered one and again, the wrong one was shipped to me. They told me I could not get the right part because they were not made anymore.
... Read more
So, I shipped it back and got in touch with Part Select. They found the right part and shipped it to me in 2 days. Problem fixed with the EXACT right part. I ordered the first part more than two months prior to receiving the correct part from PartSelect. All I had to do was plug it in to the recepticle in the stove. No tools required.
Read less
Was this helpful?
Thank you for voting!
no heating element
1 personfound this instruction helpful.
Harold from Savoy, IL
Really Easy
Less than 15 mins
I think Part Select is great, but my story? I just plugged in a module.
It was so easy...well...a technical writer--one of those people who writes operation manuals--could have done it. But afterward, they wouldn't have been able to explain to anyone other than another tech writer how it was done.
Was this helpful?
Thank you for voting!
Replace grill with burners
1 personfound this instruction helpful.
William from Lake Park, GA
Really Easy
Less than 15 mins
Lifted the grill out and slid the new burner unit in place. This was very easy; no problem at all.
Was this helpful?
Thank you for voting!
jenn-air coil element was old (1983) just needed to be replasted
1 personfound this instruction helpful.
HELGA from INDIAN TRAIL, NC
Really Easy
Less than 15 mins
took the old one out ,poped the new one in, took 2 minutes
Was this helpful?
Thank you for voting!
Replacement of worn out burner cartridges
2 of 4 peoplefound this instruction helpful.
karen l from bethlehem, PA
Really Easy
Less than 15 mins
Pulled out old cartridges and installed new. Very easy and they work perfectly. I was very happy with the extremely timely receipt of my purchase which was overnight. I paid for standard 3-5 day delivery. This was a wonderful experience and I thank you again for your help.
My Orders
