KBMS1454SSS1 KitchenAid Microwave - Instructions

All Instructions for the KBMS1454SSS1
31 - 35 of 35

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I broke my microwave glass tray
  • Lisa from Happy Valley, OR
  • Really Easy
  • Less than 15 mins
Honestly, I was afraid to order from this website, but after reviews, I placed my order, and 2-3 days later, my glass tray was replaced in my Microwave! I was freaking out because you just cant go back to Sears or Standard Brands and get a new one...everything is on-line. Im VERY happy.
Was this helpful?
Thank you for voting!
Replaced broken glass cooking tray
  • Lyn from Sonoma, CA
  • Really Easy
  • Less than 15 mins
I took the new try out of the box and placed it on the turntable and I was DONE! Took about 10 seconds. The delivery was speedy as promised. I will definitely order from this company again for replacement parts.Very good customer service and communication.
Was this helpful?
Thank you for voting!
The shaft on the turntable drive coupler was longer than the original one that was broken..
  • Curtis from San Jose, CA
  • A Bit Difficult
  • 30 - 60 mins
All other measurements were similar and fit properly. The drive shaft of the coupler was TOO long by about 3/16". I had to cut it down to the size of the original OEM shaft using a fine cut hack saw. Seems to work perfectly now....
Was this helpful?
Thank you for voting!
The capacitor was melted in the microwave
  • Jocelyne from Fort Pierce, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with a fan.
Was this helpful?
Thank you for voting!
LCD display lost some lighted bars that form the numbers
  • Ken R from Eagan, MN
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed microwave from wall (it is a built-in). Removed top of cover. Removed 4 screws that held the front panel. Pulled front panel out. Unclipped LED Display from holder. Unplugged the 2 flat cables. Removed old Display. Inserted new Display. Clipped Display in place. Plugged the 2 cables. Reinstalled front panel. Reinstalled cover. Plugged into outlet and tried it out. Viola! Reinstalled into wall.
Was this helpful?
Thank you for voting!
All Instructions for the KBMS1454SSS1
31 - 35 of 35