HTWP1200D0WW Hotpoint Washer - Parts

This part is a replacement control knob for your washer. The control knob allows you to select the desired setting for your wash cycle. If your washer will not start or the timer will not advance, you may need to replace the control knob. Occasionally the control knob will become worn, and when this happens the control knob dial will not ...Read moreturn, and you will not be able to select the appropriate setting. If your control knob is worn, broken, or missing, you will need to replace it. The control knob is made of white plastic and is approximately 2 inches in diameter. The control knob is sold separately from the control knob dial, so be sure to confirm which part you need to complete your repair.

This washer timer is a control module designed to manage and sequence the various cycles of a GE washing machine, including wash, rinse, and spin functions. It regulates the electrical components of the appliance, ensuring that each stage of the cycle activates at the correct time. A properly functioning timer is essential for cycle compl...Read moreetion and prevents the machine from stalling or stopping unexpectedly. Common symptoms of a faulty timer include failure to start, cycles that do not advance, unexpected stoppages, or a stuck timer knob. This component is compatible with a range of GE models and should be installed with the appliance disconnected from power.

This replacement drain pump is designed to efficiently remove water from your washing machine during the draining cycle. Encased in durable gray plastic, it measures approximately 9 inches in height, 6 inches in length, and 4 inches in thickness. If your washer isn’t draining properly, is leaking, or the pump isn’t spinning, this componen...Read moret may need to be replaced. Installation typically requires basic tools such as a screwdriver and wrench. Always disconnect power before beginning any repair.

This is a water pressure switch hose, also known as the air dome tube, for your washer. It is made of clear plastic and is sold individually. The hose transports water to your water pressure switch, so the switch can control how much water enters the washer during a cycle. If your washer will not fill up with water, or if water continues ...Read moreto fill the tub even after it is full, you may have a damaged water pressure switch hose. Inspect the hose for cracks and leaks, and if the hose is damaged you will need to replace it.

Used in conjunction with the timer dial knob assembly.

Also known as a Rotary Switch. This part regulates the temperature of the water in the tub.

Knob is not included.

This replacement inlet drain hose connects your washer's water pump to its tub. This hose is seven and a half inches in length and only two inches wide.

This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the rod can prevent the tub from shaking too much during operation. If your washer is shaking excessively or emitting an odd sound during use, it ...Read moremay be because the rod support is broken, and the suspension rod is not able to do its job. This part is made of white plastic and is sold individually.

The water level pressure switch in your washing machine is a very important part, as it senses and regulates the water level within the washer. If you notice that the water level in your washing machine seems off, you may need to replace the water level pressure switch. Be sure to disconnect the power and water sources from your washing machine before you complete this repair.

This part is the replacement water fill nozzle for your washer. It is white and tan in color, made of plastic, and is approximately 7 inches long and 4 inches wide. The water fill nozzle is also known as the water inlet assembly and directs the fill water into the tub. Over time the nozzle can become cracked and damaged, and this can caus...Read moree it to leak. A damaged nozzle will need to be replaced. Be sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, including the water inlet hose, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.