My Orders
HTDX100EM1WW Hotpoint Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Knob kept turning around without clicking
3 of 4 people
found this instruction helpful.
Husband took off the back of dryer and took off old timer and replaced it with the new, put on new knob, worked great, Ordered it on day, and we received it the next day, thank you for the quick delivery.
Other Parts Used:
Was this helpful?
Thank you for voting!
loud screeching and long dry times
3 of 4 people
found this instruction helpful.
When we first heard the screeching i thought right away that it was the belt. we ordered a new one and after i replaced it the dryer was still just as loud. I wished i went here first. Right away i found others with the same problem, did the same repair which was just taking 2 screws out, sliding the top and front panel off(watch for the
... Read more
electric wire connected to the panel) and replace a couple of plastic slides. now it is better than ever.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
My dryer was making a really loud, high pitched squeak and eventually a grinding noise
3 of 4 people
found this instruction helpful.
I order the parts needed to replace the slides, the felt ,and the bearing on a Sunday afternoon. The parts arrived on Tuesday even though I used regular shipping. I followed the instructions posted by another customer. It was extremely easy and only took me about fifteen minutes. My only problem was that I needed 2 each of the front slide
... Read more
and the rear slide, and I unknowingly only ordered 1 of each. I order the other 2 on Tuesday via regular shipping and they arrived on Wed. AMAZING!!!!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
slides worn and belt broken
3 of 4 people
found this instruction helpful.
Unplugged power. removed 2 screws to take of top cover. once inside removed 2 more screws to slide front panel of. I first replaced slides on front panel. I then lift drum and installed new belt. Only trick is to make sure you wrap belt around tension arm pully properly. Basically a very easy job
Other Parts Used:
Was this helpful?
Thank you for voting!
thumping noise with any kind of load
2 of 2 people
found this instruction helpful.
looked at video of dryer disassemble, replaced 4 bearing slides, reassembled. Dryer is perfect now , no noise. thank you for your parts.
Other Parts Used:
Was this helpful?
Thank you for voting!
Loud noise
3 of 5 people
found this instruction helpful.
First I watched the repair video on partselect.com and that really helped. It was really easy to replace the slides. I even ordered a new top bearing, old one was busted, and replaced it. Thank you for your help.
Other Parts Used:
Was this helpful?
Thank you for voting!
Squeaky noise
2 of 2 people
found this instruction helpful.
Removed top panel giving access to drum and screws that hold front panel (door). Removed to screws to be able to remove front panel but be careful wires are short not giving you much room to remove panel. Removed plastic Drum Bearing and replaced with New one. Installed slides and put back together.
Other Parts Used:
Was this helpful?
Thank you for voting!