HTDX100EM1WW Hotpoint Dryer - Overview

Diagrams for HTDX100EM1WW

See every part. Know exactly what you need.

Parts for the HTDX100EM1WW

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
DRYER FRONT BEARING WHITE 2PK – Part Number: WE03X37318
No Longer Available
DRYER FRONT BEARING WHITE 2PK
★★★★★
★★★★★
(41)
Part #WE03X37318
This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if this part is an issue if your dryer is unable to tumble properly or is very noisy. Damage can come from regular use. The part attaches to the outermost side of the bearing. Check both slides for signs of wear, because they often wear at the same rate, and should be replaced at the same time; there are 2 of these particular slides per dryer. This part is sold individually, so you'll need to purchase multiple parts if replacing both at the same time.
Read less
DRYER BEARING SLIDE GREEN 2PK – Part Number: WE03X37317
No Longer Available
DRYER BEARING SLIDE GREEN 2PK
★★★★★
★★★★★
(8)
Part #WE03X37317
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if this part is an issue if your dryer is unable to tumble properly or is very noisy. Damage can come from regular use. As the slides start to break down it may cause your dryer to make noise or not dry clothes in the usual amount of time. You will need to purchase two for both sides of your dryer. They attach to the outer-most sides of the bearing. The manufacturer recommends replacing both slides at the same time. Take this opportunity to clean out the lint and dust in the dryer, to keep it running smoothly. This is a genuine replacement part that comes directly from the manufacturer. This item is sold individually. The part attaches to the outermost side of the bearing. Although this part is denoted as being "Green" in its title, many users and technicians have noted that its true colour is closer to a dark gray or black.
Read less
Front Drum Bearing – Part Number: WE3M26
$105.45
Special Order
Front Drum Bearing
★★★★★
★★★★★
(54)
Part #WE3M26
This drum bearing helps your dryer operate as quietly as possible.The drum slides should also be replaced when replacing the drum bearing. The slides are NOT included with this part this is the bearing only. Slides must be ordered separately.
Drive Belt – Part Number: WE03X29897
$49.95
Special Order
Drive Belt
★★★★★
★★★★★
(32)
Part #WE03X29897
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley, allowing all the parts to work together, spinning the drum as the motor rotates. If the drum will not turn when the dryer is turned on the belt is likely broken. It is common for belts to stretch or become brittle over time, which is what leads to the breakage. If broken, it should be replaced; the drum simply cannot spin without this belt. Refer to your model number and user manual to check if this part is right for you. Ensure you use work gloves to protect your hands from sharp internal parts during this repair. Please note: When comparing the length of your old belt to the length of the belt as stated here, remember that a small amount of stretching and contortion may occur with belts over time for a range of different reasons. Unless your belt is drastically different in length, this belt is what you are looking for despite any small inaccuracies. You will need to remove power to your appliance, remove the main panel, and access the motor drive to slip your new belt back into place.
Read less
Timer Knob – Part Number: WE1M652
$24.87
Special Order
Timer Knob
★★★★★
★★★★★
(27)
Part #WE1M652
This OEM Timer Knob is a white plastic knob which can be easily installed onto your machine's timer rod, in order to control the timer. If the part breaks off, it should be replaced. Refer to your user manual and model number to see if this part is right for you. It is a three-inch-diameter part that accepts a D-shaped shaft. To replace your faulty knob, simply pull the existing knob straight off the shaft and install the replacement back onto the shaft. No tools are required. This item is sold individually and is not part of a set. The timer knob contains the insert as well as the knob itself.
Read less
Drum Bearing Sleeve – Part Number: WE1M462
$28.95
Special Order
Drum Bearing Sleeve
★★★★★
★★★★★
(2)
Part #WE1M462
If your dryer’s making loud noises or the drum seems shaky, this rear bearing sleeve might be the fix. It helps the drum spin smoothly and stay in place. When it wears out, you might hear squeaks or notice your clothes aren’t drying as well. Made for GE and Hotpoint dryers, this part is a simple way to get your machine running quietly and efficiently again.
Door Strike – Part Number: WE1X1192
$13.95
Special Order
Door Strike
★★★★★
★★★★★
(3)
Part #WE1X1192
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.
Door Latch – Part Number: WE1M1011
$25.31
Special Order
Door Latch
★★★★★
★★★★★
(2)
Part #WE1M1011
This Genuine OEM door latch is designed for use with a wide range of GE clothes dryers. Constructed from a combination of durable metal and plastic, the latch is mounted onto the dryer frame to securely hold the door closed during operation. A properly functioning latch is essential for safe and efficient drying cycles. Sold individually, this replacement part may require a screwdriver and a pair of pliers for removal and installation. Replacing a worn or broken latch helps restore proper door alignment and ensures the appliance operates as intended.
Read less
Rear Drum Bearing Kit – Part Number: WE25M40
No Longer Available
Rear Drum Bearing Kit
★★★★★
★★★★★
(2)
Part #WE25M40
This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Helps keep your dryer running as smoothly as possible with as little noise as possible. NOTE: Bearing plate has slot in it for ground strap.
Push-to-Start Switch – Part Number: WE4M416
$36.24
Special Order
Push-to-Start Switch
★★★★★
★★★★★
(4)
Part #WE4M416
Restore dependable startup functionality to your dryer with this replacement push-to-start switch, designed to activate the appliance when pressed and released. Compatible with a range of dryer models, this switch is a key component in initiating the drying cycle. If your dryer won’t start or begins running without pressing the button, the switch may be faulty and should be replaced. Installation is straightforward and requires only a Phillips and flathead screwdriver. For safety, always disconnect power before beginning the repair. Once the control panel is removed, the old switch can be disconnected and the new one installed with minimal effort. Sold individually, this part offers a simple and effective solution for getting your dryer back in working order.
Read less
High Limit Thermostat - L315-65 – Part Number: WE4M137
$72.70
Special Order
High Limit Thermostat - L315-65
★★★★★
★★★★★
(8)
Part #WE4M137
This part is the replacement high-limit thermostat or safety thermostat for your dryer. The high-limit thermostat is found on the upper right-hand side of the heater housing, and it cuts off power to the dryer motor if the temperature reaches an unsafe level. If you push the start button and nothing happens, the high-limit thermostat should be tested for continuity and replaced if the contacts are open. Be sure to disconnect power to the dryer before you begin this repair. This part is sold individually and is an OEM part.
Read less
Retainer O-Ring – Part Number: WE1M461
$35.58
Special Order
Retainer O-Ring
Part #WE1M461
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-ring is made of rubber, and can occasionally wear down and break. If you notice that your dryer drum bearing is worn while you’re replacing the O-ring, you should consider replacing it as well. This product is sold individually, and is an OEM part from the manufacturer.
Read less
View More

Manuals & Care Guides for HTDX100EM1WW

Click to download
Install
Installation Instructions
(0.83MB)
Manual
Owner's Manuals
(1.60MB)
Manual
Owner's Manuals
(2.84MB)

Questions And Answers for HTDX100EM1WW

Ask our experts a question about this model and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob - For model number HTDX100EM1WW
March 21, 2020
It was working fine drying clothes and just quit. Breakers and outlet check out fine.
Chris Boyle Profile
Hello, Thank you for your question. Did the unit stop heating, or will it not start at all anymore? We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Linda - For model number HTDX100EM1WW
November 12, 2024
Dryer gets too hot and does not turn off. which thermostat do I need?
Chris Boyle Profile
Hi Linda, Thank you for your question. If the dryer is too hot, the air flow may be restricted. If it is, you will need to clean out the lint filter, the filter duct, the exhaust hose, and exterior vent. If the dryer will not shut off the issue may be with the timer. You will need to test it with a multimeter for continuity. Unplug the dryer from the electrical outlet and remove the timer from the dryer. Set your multimeter to the Rx1 setting and touch the probes to the terminals. You should receive a reading between 2000 and 3000 ohms. If you get a reading outside this range, you will need to replace the timer. You should also check both the cycling and high limit thermostats. For the cycling thermostat, you should get a reading of zero or infinity. If you get a reading outside this range, you will need a new cycling thermostat. For the high limit thermostat, you should get a reading of zero. If you get a reading that is not zero, you will need to replace the high limit thermostat. We hope this helps!
$63.80
Special Order
Cycling Thermostat - 4 Wire
$63.80
Special Order
Cycling Thermostat - 4 Wire
$133.95
Special Order
Dryer Timer
No Longer Available
Lint Filter - White Frame
Was this helpful?
Thank you for voting!
Susan - For model number HTDX100EM1WW
January 8, 2025
I need leveling legs for this dryer
Chris Boyle Profile
Hello Susan, Thank you for writing in. Our research has found, part number PS12726566 is the Leveling Leg for your model and they are sold individually. We hope this helps.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the HTDX100EM1WW

How this model fails, and the parts that fix it.

Noisy
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Timer Not Working
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Too hot
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Not Heating
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Door Pops Open
Fixed by
these parts
Fixing
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Heat stays on after drum has stopped
Fixed by
these parts
Fixing
Show All

Videos related to models starting with HTDX100EM1WW

View More

Watch our pros, then fix it yourself.

Replacing the Drive Belt

Replacing the Drive Belt

Replacing the Drum Bearing Sleeve

Replacing the Drum Bearing Sleeve

Replacing the Front Drum Bearing

Replacing the Front Drum Bearing

Replacing the Retainer O-Ring

Replacing the Retainer O-Ring

Replacing the Door Strike

Replacing the Door Strike

Replacing the Door Switch

Replacing the Door Switch

Replacing the Cycling Thermostat - 4 Wire

Replacing the Cycling Thermostat - 4 Wire

Replacing the MICA HEATER

Replacing the MICA HEATER

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic
804 of 916 people found this instruction helpful.
  • Matthew from Plainfield, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the new slides in place and installed a new felt strip. I put it back together and that was that. Very easy.
Read less
Was this helpful?
Thank you for voting!
Intermittant squeaking noise
631 of 790 people found this instruction helpful.
  • Mark from Addison, IL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Basically, I followed the same steps a prior person posted.
1.Removed the two screws inside the door, on the top part of the opening.
2.Lifted up and removed the top.
3.Removed two screws holding the front panel in place.
4.Held up the drum while removing the front panel. I carefully turned the panel so I could get at the drum bearing without pulling the wires connecting it to the front panel. The wires are not very long, so I had to be careful not to pull on them.
5.Carefully pried off the old drum bearing, using just my hands. It was fairly tight, and popped out just as I started to worry if I was putting too much pressure on it.
6.Checked to see how the old felt was installed, then I pulled out the old felt.
7.Inserted the new felt, being careful to insert one end into a slot the same way the original was installed.
8.Inserted the new slides into the new drum bearing. The gray slides went in at the eleven and one o'clock positions, the white slides went in at ten and two o'clock.
9.Removed a surplus plastic piece from the new drum bearing (where the light comes through).
10.Inserted the new drum bearing, putting the bottom tabs in first, then pivoting it into place. I squeezed it into place to make sure it was tight.
11.Lifted up the drum and put the front panel back on.
12.Screwed the front panel back on, using the two screws.
13.Carefully put the top back on.
14.Screwed in the two screws inside the front door to fasten down the top.
That was it! I started up the dryer and it worked fine. No more squeaking.
About the only thing odd about the repair is why PartSelect sells each slide separately (i.e., I had to order 2 white slides and 2 gray slides). I can't imagine replacing just one, so why not package them in pairs, or maybe even all four in one package.
At any rate, the repair was easy, and a lot cheaper than having someone come out to fix it.
Read less
Was this helpful?
Thank you for voting!
the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
212 of 275 people found this instruction helpful.
  • McKinley from Meraux, LA
  • Easy
  • Less than 15 mins
  • Screw drivers
I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.
Was this helpful?
Thank you for voting!
View More