GFSF2KEXAWW General Electric Refrigerator - Parts

This is a replacement evaporator fan grommet for your refrigerator. The fan grommet absorbs the vibration from the evaporator fan motor for quiet operation while it runs. If your evaporator fan is unusually noisy, it could be because the grommet is damaged. This grommet is made of grey plastic and is approximately one inch in diameter. To...Read more access the fan grommet and complete this repair, you will need to remove the evaporator fan motor assembly. This part is sold individually.

This is a replacement set screw for your refrigerator door. The set screw attaches the door handle to the stud on the refrigerator door. The screw is approximately ¼ of an inch in length and unlike some other screws, it does not have a screw head. It is made of stainless steel and is sold individually. This is an OEM part sourced directly from the manufacturer.

The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side brack...Read moreet on the evaporator fan motor assembly. To access the bumper, you will need to remove the evaporator fan motor assembly from the freezer. This part is made of orange rubber and is less than half an inch in diameter. It has a rounded top and a slightly pointed bottom, and is sold individually.

This DC fan motor moves air across the condenser coils and compressor to help remove heat. A failed motor may cause poor cooling, a hot compressor, or humming and squealing sounds. Before replacing it, clean the coils and check the fan blade, wiring, and air path for dirt or damage. Confirm fit with the full appliance model, 4-pin plug, a...Read morend 11.3- to 12-volt rating. Unplug the refrigerator before removing the rear panel. Keep hands away from the blade, protect the cooling lines, and reinstall the panel before testing the unit.

Can be used with the evaporator or condenser fan motor.

This is a 12-24 TT HX 7/8 S refrigerator or freezer screw. It is a little over 1 inch in total length. This is sourced directly from the original manufacturer.

This evaporator fan blade is for your refrigerator, and it circulates air so that the temperature of the fridge is regulated. This model has 3 blades, and is a little more than 4 inches in diameter. It is made of white plastic and is sold individually. If your refrigerator is noisy and you hear a clicking sound, it is a good indication th...Read moreat the evaporator fan blade is warped or damaged. If the fridge or freezer sections become too warm, the fan could be to blame as well.

Give your dishwasher a clean, updated look with this black control panel cover. It holds the buttons and display so you can easily choose your wash settings. If your current panel is cracked or worn, this replacement part is a great fix. Just follow your appliance’s manual for installation.

This freezer drawer slide rail holder kit supports and guides the freezer drawer, allowing it to open and close smoothly while staying properly aligned. The kit includes both left and right rail holders, which help provide stable support for the drawer during everyday use. If the original rail holders are worn, damaged, or misaligned, the...Read more drawer may stick, sag, move unevenly, or come off its track. Replacing these components can help restore smooth drawer operation, improve stability, and maintain the organization and function of the freezer compartment. Built from durable materials, this kit is designed for reliable, long-lasting performance.

Need more space in your fridge door? This replacement bin is perfect for holding condiments, jars, and bottles. It’s clear, sturdy, and easy to install—just slide it into place. If your old bin is cracked or missing, this one will help keep things neat and organized again. Just make sure it fits your model before ordering!