Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
This is almost embarassing but you asked....
3 of 4 peoplefound this instruction helpful.
laurie from gold canyon, AZ
Really Easy
Less than 15 mins
Once the part arrived, which was very quickly BTW..all I had to do was remove the old filter and then just screw the new one into place....Now I just happen to be both female and blonde but was able to get the job done in less than 15 minutes (that includes opening the box) and with very little water dripping from the old filter!!! Look
... Read mores like I could work as the Maytag repair woman soon!!
Read less
Was this helpful?
Thank you for voting!
Boyfriends freezer door wouldn’t shut completely
3 of 4 peoplefound this instruction helpful.
Megan from NORFOLK, VA
Really Easy
Less than 15 mins
I got really tired of taking food out covered in icicles and stabbing a huge block of ice out of the bottom. Turns out all he needed was a little wheel with cogs and I looked up the sticker model number on this site and clicked the part of the fridge. So simple, wish I would’ve done it sooner.
Was this helpful?
Thank you for voting!
Crisper drawers were cracked and broken; end cap broken peg
3 of 4 peoplefound this instruction helpful.
Susan from Oxford, OH
Really Easy
Less than 15 mins
Nutdriver, Screw drivers
Replaced two original crisper drawers with 2 new drawers; replaced broken end cap which required the removal of a few bolts and screws. The replacement parts were identical matches--a huge relief. The interior of the fridge looks like new. This follows upon not being able to get the parts directly from the manufacturer.
Repair was simple and just as described by several others on this site! From finding the part, ordering, quick shipping and instructions, PartsSelect made this job a breeze to complete.
changed the light bulb still would not work so I figured it was the switch sure enough.
3 of 4 peoplefound this instruction helpful.
anthony from HAVELOCK, NC
Really Easy
15 - 30 mins
I took a chance and ordered a switch that is next to the top of the door. looked for how to remove it easily done in ten minutes works fine last long time.
Was this helpful?
Thank you for voting!
Ice machine was not making ice
3 of 4 peoplefound this instruction helpful.
William from Grafton, MA
Really Easy
Less than 15 mins
Changed the ice and Water filter, works great...
Was this helpful?
Thank you for voting!
Broken shelf glass
4 of 7 peoplefound this instruction helpful.
Nancy from Port Washington, NY
Really Easy
Less than 15 mins
I unpacked the glass and slipped it into the shelf. Done. What was more impressive was the delivery time. I ordered the glass at about 12:30pm one day and the glass was at my door by 9am the next morning. Even my husband was impressed with that.
Was this helpful?
Thank you for voting!
defective light switch
3 of 4 peoplefound this instruction helpful.
THOMAS from WILLARD, OH
Really Easy
Less than 15 mins
inserted a knife between the switch and the plastic interior in order to pop the switch out. then took off the 2 wires on the old switch put them on the new switch and reinserted the switch into the plastic interior.
Was this helpful?
Thank you for voting!
Filter stopped up. Causing the refrigerator to make a loud noise. water dispenser didn't work. less than 4.00 fixed all that
3 of 5 peoplefound this instruction helpful.
Rodney B. from Crestview, FL
Really Easy
Less than 15 mins
Shut off water supply. filter is located in the upper right hand corner of the refrigerator on the inside. open the drop-down door. by hand pull the filter downward. then twist it to the left one quarter turn. it should pull out. I replaced it with a filter bypass plug. you can purchase a high quality filter to replace.it don't buy cheap
... Read morefilter.I made that mistake! hope this helps good luck!
Read less
Was this helpful?
Thank you for voting!
Tab broke off for chiller door.
2 of 2 peoplefound this instruction helpful.
Ed from SMITH, NV
Very Easy
Less than 15 mins
Socket set
Easy repair, nothing complicated.
Was this helpful?
Thank you for voting!
broken plastic on crisper drawer
2 of 2 peoplefound this instruction helpful.
Stephanie from MOUNT AIRY, MD
Really Easy
15 - 30 mins
Socket set
easy peasy
Was this helpful?
Thank you for voting!
The pin on the right side of the Deli Drawer full width door broke off
2 of 2 peoplefound this instruction helpful.
Richard from Port Aransas, TX
Easy
15 - 30 mins
Socket set
I removed the Deli Drawersvegatable and fruit drawers. Removed the glass panel. Removed the screws holding the Endcap and snapped the old one out. A back panel strip that controls the humidity snapped out. I installed the back panel to the new endcap. Installed the new endcap snapping it in place and used the screws to keep it in plac
... Read moree. It was not difficult and everything fit perfectly. The only thing it takes is a little understanding as to how it all fits together. It took about 20 minutes.
Read less
Was this helpful?
Thank you for voting!
Broken pin to door
2 of 2 peoplefound this instruction helpful.
Charlie from HARRODSBURG, KY
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
Easy
Was this helpful?
Thank you for voting!
I broke the pin that holds the lid that covers pantry at the bottom of the fridg.
2 of 2 peoplefound this instruction helpful.
Gerald from Grants Pass, OR
Really Easy
15 - 30 mins
Nutdriver
I removed the drawers above and the glass shelf, then removedthe screws to remove the broken end cap then reversed the proceedure to install the new part. Was simple to do and it works fine.
My Orders
