FFSS2615TP3 Frigidaire Refrigerator - Parts

The crisper drawer cover rests on this support, which mounts inside the refrigerator cabinet wall. This is an OEM replacement part. Confirm it fits your refrigerator model before ordering.

This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire side-by-side models after 2009 that use a water filter located in the back, top right. Filters all dispensed drinking water and the water used...Read more for making ice. It minimizes chlorine flavor and smell and cuts down on common contaminants by 99 percent. You will need to replace the filter every six months or when the light indicates. To install the new filter slide it into the housing and push until it locks in place. Press the indicator button for ten seconds to reset after replacing.

If your refrigerator is not cooling, a failed compressor run capacitor may be the cause. This OEM capacitor helps the compressor start and supports its operation in refrigerators and freezers. It has a capacitance of 15 MFD, so check fit against your appliance model before ordering. A quarter-inch socket or nut driver is listed for replacement.

The frame that holds refrigerator shelving in place is the lower crisper pan cover. This OEM part does not include the glass insert.

If water leaks at the filter connection or the filter base is visibly cracked, this housing may be the replacement needed. It connects to the refrigerator, secures the two-headed water filter cartridge, and directs filtered water to the dispenser and ice maker. The white plastic housing has two blue filter receptacles, measures approximately 3-1/2 inches by 3 inches, and is sold individually. It is an OEM part.

The crisper drawer cover uses this glass insert to help retain moisture and protect produce. It fits into the cover frame and is an OEM part. Confirm fit against your refrigerator model before ordering, and wear work gloves during installation.