FFSS2615TP3 Frigidaire Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Crisper Cover Support - Front – Part Number: 241993101
$16.27
In Stock
Crisper Cover Support - Front
★★★★★
★★★★★
(17)
Part #241993101
A level crisper cover relies on secure supports beneath its frame. This plastic front crisper cover support mounts to the inner refrigerator cabinet wall and holds up the shelf above the produce drawers. A cracked or broken support may allow the cover to drop or tilt, making the drawers difficult to open and close. Replacing a damaged stud helps restore stable shelf support when the cover frame and cabinet attachment area remain intact. Damage to those surrounding parts can also cause sagging or uneven drawer movement. This is an OEM part sourced directly from the manufacturer.
Crisper Support - Rear – Part Number: 241993001
$22.95
In Stock
Crisper Support - Rear
★★★★★
★★★★★
(4)
Part #241993001
The crisper drawer cover rests on this support, which mounts inside the refrigerator cabinet wall. This is an OEM replacement part. Confirm it fits your refrigerator model before ordering.
Refrigerator Water Inlet Valve – Part Number: 242252702
$104.89
In Stock
Refrigerator Water Inlet Valve
★★★★★
★★★★★
(55)
Part #242252702
This refrigerator water inlet valve assembly controls water flow to the ice maker and door dispenser. Its three electric coils open and close separate water paths, sending water where it is needed. A leaking or blocked valve may cause weak dispenser flow, small ice cubes, slow ice production, or water pooling behind the refrigerator. Replacing a faulty assembly helps restore steady water flow and stops unwanted filling between uses. Unplug the refrigerator and shut off the water supply before replacing the valve. This is an OEM part sourced directly from the manufacturer.
Refrigerator Water Filter – Part Number: WF3CB
$114.19
In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(14)
Part #WF3CB
This NSF-Certified OEM filter is white in color with a plastic housing and extruded carbon filter media. It measures 2.3-Inches deep, 9.1-Inches high and 2.3-Inches wide. It fits certain Frigidaire side-by-side models after 2009 that use a water filter located in the back, top right. Filters all dispensed drinking water and the water used for making ice. It minimizes chlorine flavor and smell and cuts down on common contaminants by 99 percent. You will need to replace the filter every six months or when the light indicates. To install the new filter slide it into the housing and push until it locks in place. Press the indicator button for ten seconds to reset after replacing.
Upper Crisper Drawer Cover - Glass NOT Included – Part Number: 240350702
$57.15
In Stock
Upper Crisper Drawer Cover - Glass NOT Included
★★★★★
★★★★★
(18)
Part #240350702
This plastic upper crisper cover frame supports the refrigerator drawer and holds the glass shelf insert above it. Molded drawer glides guide the crisper as it opens and closes. Cracks, broken corners, or damaged glides may leave the shelf unstable or cause the drawer to catch. Inspect the drawer and surrounding supports before replacement, since those parts can also affect movement. This item includes the frame only; the glass insert and drawer are not included. Match the upper crisper position to the appliance parts diagram before fitting the replacement. This is an OEM part sourced directly from the manufacturer.
Door Shelf – Part Number: 240351601
$65.26
In Stock
Door Shelf
★★★★★
★★★★★
(3)
Part #240351601
This white plastic door bin holds jars, bottles, and other containers inside the freezer or refrigerator door on specified models. It snaps into the designated mounting points without tools and is sold individually. Cracks, broken walls, or damaged attachment areas may keep the bin from sitting securely or supporting its contents. Inspect the door supports as well before replacement. Match the shelf position and mounting shape to the appliance parts diagram, since upper freezer bins and wider fresh food door bins may look similar but have a different fit. This is an OEM part sourced directly from the manufacturer.
Door Bin - Clear – Part Number: 240356402
$128.61
In Stock
Door Bin - Clear
★★★★★
★★★★★
(6)
Part #240356402
This clear plastic door bin holds gallon sized containers, bottles, and jars inside the refrigerator fresh food door. It attaches to the designated door supports and is sold individually. Cracks, broken walls, or damaged mounting areas may keep the bin from sitting securely or supporting its contents. No tools are needed for replacement. Lift out the old bin, align the replacement with the mounting tabs, and lower it into place. Confirm the shelf position and mounting shape before ordering, since lower door bins and freezer bins can have a different fit. This is an OEM part sourced directly from the manufacturer.
Run Capacitor - 120V – Part Number: 297286803
$52.37
In Stock
Run Capacitor - 120V
★★★★★
★★★★★
(7)
Part #297286803
If your refrigerator is not cooling, a failed compressor run capacitor may be the cause. This OEM capacitor helps the compressor start and supports its operation in refrigerators and freezers. It has a capacitance of 15 MFD, so check fit against your appliance model before ordering. A quarter-inch socket or nut driver is listed for replacement.
Refrigerator Crisper Drawer – Part Number: 240351061
$138.25
In Stock
Refrigerator Crisper Drawer
★★★★★
★★★★★
(2)
Part #240351061
Fruits and vegetables stay organized in this clear plastic upper crisper drawer, which slides beneath the crisper cover for easy access. Transparent sides make it simple to see stored produce without opening the drawer. Cracks, broken edges, or damaged sliding surfaces may cause the bin to catch, tilt, or become difficult to use. Replacing a damaged drawer restores contained produce storage when the surrounding tracks and supports are intact. The humidity control slide is sold separately and is not included with the replacement drawer. This is an OEM part sourced directly from the manufacturer.
Crisper Drawer Cover - NO Glass – Part Number: 240350903
$113.41
In Stock
Crisper Drawer Cover - NO Glass
★★★★★
★★★★★
(2)
Part #240350903
The frame that holds refrigerator shelving in place is the lower crisper pan cover. This OEM part does not include the glass insert.
MANIFOLD FILTER – Part Number: 242009604
No Longer Available
MANIFOLD FILTER
★★★★★
★★★★★
(7)
Part #242009604
If water leaks at the filter connection or the filter base is visibly cracked, this housing may be the replacement needed. It connects to the refrigerator, secures the two-headed water filter cartridge, and directs filtered water to the dispenser and ice maker. The white plastic housing has two blue filter receptacles, measures approximately 3-1/2 inches by 3 inches, and is sold individually. It is an OEM part.
Crisper Glass Insert – Part Number: 240350649
$144.98
In Stock
Crisper Glass Insert
★★★★★
★★★★★
(7)
Part #240350649
The crisper drawer cover uses this glass insert to help retain moisture and protect produce. It fits into the cover frame and is an OEM part. Confirm fit against your refrigerator model before ordering, and wear work gloves during installation.

Questions And Answers for FFSS2615TP3

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David - For model number FFSS2615TP3
November 18, 2023
Part number for LED interior light
Chris Boyle Profile
Hello David, thank you for your question. The LED interior Light is PS12364857. We hope this helps.
$50.55
In Stock
LIGHT BULB
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the FFSS2615TP3

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
water leaking out of refrigerator
608 of 723 people found this instruction helpful.
  • Jose from Alexandria, VA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Wrench (Adjustable)
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Was this helpful?
Thank you for voting!
freezer shelf broke
506 of 533 people found this instruction helpful.
  • MONICA from LANCASTER, CA
  • Really Easy
  • Less than 15 mins
Easy slide it back in place
Was this helpful?
Thank you for voting!
icemaker stopped making ice
357 of 428 people found this instruction helpful.
  • David from New Bern, NC
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle.
A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if t he maker dumped the ice into the bin.
Was this helpful?
Thank you for voting!