DE180 Maytag Dryer - Parts

This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once.

The tumbler and motor belt in your dryer allows the drum to spin during the drying cycle. At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. The belt is black in color and it is made entirely of rubber. If your dryer will not tumble, is noisy during operation, or will not start you may need to replac...Read moree the belt. To complete this repair, you will need to remove the front panel as well as the drum. You will need a 5/16 nut driver and a stubby Phillips screwdriver to complete the repair. Be sure to disconnect power to the dryer before you begin this repair. During the repair, make sure the belt doesn't fall into the groove in the drum, which will cause it to be too loose. You should be able to access the belt and replace it by removing the front panel and bulkhead.

This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.

This blower wheel comes with a metallic hub clamp to hold it firmly in place.

This lint filter screen is slide in styl type of Maytag filter screen. It is most typically used for the 08 and later series of Maytag gas or electric clothes dryers that appear before 1990.

This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.

This dryer door latch kit comes in two pieces: a door latch, and a door strike. It's used to help hold your door shut to your dryer.

This part replaces older two terminal switches.

Made for use with series 08 and later gas and electric clothes dryers, this pre-stretched heating element coil carries 240 volts.

This dryer drive motor is a genuine OEM replacement part designed to power the drum rotation in select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Magic Chef dryers. Operating at 115 volts and 60 Hz with a 1/4 horsepower output, it drives the belt that turns the drum, ensuring consistent and efficient drying performance. The updat...Read moreed motor features a redesigned switch and new wire terminals, which may require re-wiring during installation. Common symptoms of a failing motor include the dryer not starting, the drum not turning, or the appliance stopping mid-cycle. Installation should be performed by a qualified technician, and it is essential to verify compatibility with your specific model before ordering. *Note: part does not come with installation instructions

Keep your dryer safe and running smoothly with this high-limit thermostat. It shuts off the heat when things get too hot—around 200°F—and turns it back on once it cools down to about 170°F. This helps prevent overheating and keeps your laundry routine worry-free. With two easy-to-connect terminals, it fits many dryer models and installs quickly with basic tools.

This heating element consists of two pieces: a metal tube and a coil. It carries 240 volts and is approximately 17 inches long with an approximate 7 inch diameter.