- Home
- CVM919M2N1S5
- Instructions
CVM919M2N1S5 General Electric Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Had to replace charcoal filter
15 of 25 people
found this instruction helpful.
-
Jared from SIERRA VISTA, AZ
- Easy
- 15 - 30 mins
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen ... Read more sions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen ... Read more sions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Read less
Was this helpful?
Thank you for voting!
Charcoal Filter replaced
15 of 39 people
found this instruction helpful.
-
Glenn from SAN ANTONIO, TX
- Very Easy
- Less than 15 mins
Open the microwave door, push the press and release door that is located across the top of the oven. Remove and replace filter, close access door, close microwave.
Was this helpful?
Thank you for voting!
Warning light came on to replace
2 of 3 people
found this instruction helpful.
-
Doug from CHALFONT, PA
- Really Easy
- Less than 15 mins
Ok. Surprised I was sent a damaged part. Box was intact but the aluminum frame was bent. Looks like I received a factory reject. I was able to make it fit
Was this helpful?
Thank you for voting!
Carcoal Filter indicator light on
3 of 6 people
found this instruction helpful.
-
Thomas from RIVER EDGE, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
Loosened screw on top of filter
Removed and replaced filter
Removed and replaced filter
Was this helpful?
Thank you for voting!
My microwave started tripping the breaker
2 of 3 people
found this instruction helpful.
-
Juan from FONTANA, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Yes, it started tripping the breaker and at the end it wouldn't work at all, I started checking continuity on all door switches everything checked good, then I proceeded to check the thermostats and found out that one didnt have continuity so I replaced it. Every thing works good except that as soon as I pluged the microwave to the outle
... Read more
t the exhaust fan comes on and does not shut off. Does anyone known why or do I need to change something else.
Thanks
Thanks
Read less
Was this helpful?
Thank you for voting!
Needed filter
1 person
found this instruction helpful.
-
MS Bettie J from RIVERDALE PK, MD
- Really Easy
- Less than 15 mins
Open main door at the top is small door open take out old filter and replace newone
Was this helpful?
Thank you for voting!
noisy microwave turntable
1 of 4 people
found this instruction helpful.
-
mark from SUMMERFIELD, FL
- Really Easy
- Less than 15 mins
I never knew why it made noise till I looked at the break down on this web site and found it was missing rotating ring since it was new. But unfortunately, I never received turntable ring which was ordered on 12/19/2022 now its tracking says Wednesday, 12/21/2022
9:36 AM
In transit
CAMP HILL, AL it has been stuck there all ... Read more this time still not on its way to Florida. I don't understand did fedx put on southwest airlines?
9:36 AM
In transit
CAMP HILL, AL it has been stuck there all ... Read more this time still not on its way to Florida. I don't understand did fedx put on southwest airlines?
Read less
Was this helpful?
Thank you for voting!