CVM919M2N1S5 General Electric Microwave - Overview
Sections of the CVM919M2N1S5
[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Charcoal Filter
PartSelect #: PS8746150
Manufacturer #: WB02X11550
This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air ...
$70.19
Special Order
Grease Filter
PartSelect #: PS1022452
Manufacturer #: WB06X10608
Sold individually. Most appliances require 2.
$86.97
Special Order
ROTATING RING Assembly
PartSelect #: PS1016203
Manufacturer #: WB06X10625
When your microwave isn't heating your food evenly, the problem could lie with the rotating ring assembly - a crucial piece in ensuring proper function. Our GE Rotating Ring Assembly might just be the...
$46.54
Special Order
DAMPER BRACKET
PartSelect #: PS8753754
Manufacturer #: WB06X10938
Do you have a microwave that's not performing to the best of its ability? It might be time to consider GE's Damper Bracket. Designed particularly for microwave appliances, this high-quality component ...
$107.62
Special Order
Microwave Turntable Motor
PartSelect #: PS12722592
Manufacturer #: WB26X32190
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
No Longer Available
Microwave Installation Hardware Kit
PartSelect #: PS1021433
Manufacturer #: WB01X10298
$122.72
Special Order
Microwave Fuse
PartSelect #: PS3486694
Manufacturer #: WB27X11138
If your microwave suddenly stopped working, this 20-amp fuse might be the reason. It’s designed to blow when there’s a power surge, protecting your appliance from damage. This genuine part fits many G...
No Longer Available
Microwave Door Interlock Switch
PartSelect #: PS8754454
Manufacturer #: WB24X10204
The door interlock switch prevents the microwave from starting when the door is open.
No Longer Available
Microwave Micro Switch Monitor
PartSelect #: PS8754455
Manufacturer #: WB24X10205
Is your microwave not working like it used to? The problem might be with the door monitor switch, and we at GE have the perfect solution for you. The GE Microwave Switch is a small yet vital part of y...
No Longer Available
Microwave Door Interlock Switch Lever
PartSelect #: PS8753607
Manufacturer #: WB03X10348
The door interlock switch lever activates the interlock switch when the door is closed.
No Longer Available
Common Symptoms of the CVM919M2N1S5
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Had to replace charcoal filter
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimensions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimensions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Parts Used:
-
Jared from SIERRA VISTA, AZ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
15 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Charcoal Filter replaced
Open the microwave door, push the press and release door that is located across the top of the oven. Remove and replace filter, close access door, close microwave.
Parts Used:
-
Glenn from SAN ANTONIO, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
15 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Warning light came on to replace
Ok. Surprised I was sent a damaged part. Box was intact but the aluminum frame was bent. Looks like I received a factory reject. I was able to make it fit
Parts Used:
-
Doug from CHALFONT, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!