- Home
- CSA1201RSS01
- Instructions
CSA1201RSS01 Hotpoint Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
turntable broke
-
Debra from Pensacola, FL
- Really Easy
- Less than 15 mins
No repair involved, just replaced......looked online and ordered, thought it would take 4-5 days, came in perfect condition within TWO 2 days. awesomeness
Was this helpful?
Thank you for voting!
microwave won't heat
-
Stephanie from Kernersville, NC
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
bought a fuse but that didn't solve the problem. Guess I need a new microwave
Was this helpful?
Thank you for voting!
Needed New Holder Assembly and bulb
-
James from Reno, NV
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced the cord, attached it to the light fixture, and then replaced the cover for the bottom of the appliance
Other Parts Used:
Was this helpful?
Thank you for voting!
Light bulbs had burned out.
-
Margaret from Reno, NV
- A Bit Difficult
- Less than 15 mins
I myself had difficulties replacing bulbs, as I have no feelings in my fingers, so I asked my son while holding the bulb in the bubble wrap, He had no problems what so ever.
Was this helpful?
Thank you for voting!
Light on hood of microwave burned out.
-
Shirley from Collins, MS
- Easy
- Less than 15 mins
-
Screw drivers
Removed tiny screw from under the microwave that held the lid shut where the light was located. Took out old bulb and replaced with new one. Very easy!!!!
Was this helpful?
Thank you for voting!
Powered Off completely
-
Mohammad from Piscataway, NJ
- Easy
- Less than 15 mins
-
Screw drivers
After reading reviews that there was no power what so ever and a fuse replacement will solve the problem, I tried it. Replacing the fuse is very easy (and I am not handy at all). All you have to do is remove the microwave cover from the top by removing two screws, slide the cover to the left and pulling the cover off. Then remove the g
... Read more
rill in front of you, by removing one or two screws. The fuse is in front of you, use pliers and be firm but gentle. Replacing the fuse is easy but it did not solve my problem.
Read less
Was this helpful?
Thank you for voting!
All power to the microwave went out.
-
Michael from East China Township, MI
- Easy
- Less than 15 mins
-
Screw drivers
PartSelect had helpful repair instructions on-line which made the repair easier and faster. Unfortunately, there were other problems with the oven that immediately blew the new fuse I had just installed. It was then determined that additional repair would most likely cost almost as much as a new microwave.
Was this helpful?
Thank you for voting!
The glass microwave turntable for the microwave was dropped and it brokd.
-
Lois from Sarasota, FL
- Really Easy
- Less than 15 mins
Opened the box, put the glass turntable on the center fitted over the three little bumps.
Was this helpful?
Thank you for voting!
2 bulbs in the lower part of the unit had burned out.
-
Don from Stephens City, VA
- Really Easy
- Less than 15 mins
Removal of the bulbs was easy; reinserting was not as easy due to the configuration/placement of the bulbs in the unit. It was interesting that a simple suggestion to keep the bulbs covered with some of the packing material made sense as to not directly handling the bulb itself and causing any contamination of the bulb(s).
Was this helpful?
Thank you for voting!
both bulbs burned out
-
Jerry from Laguna Niguel, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
I used a phillips screwdiver to open the light cover protecting the halogen bulbs (2) both had burned out and needed to be replaced. A bit akward to replace, but within 5 minutes both were removed. I called your part service department to order replacements,(friendly and courteous service I might add!)was told that they would arive in abo
... Read more
ut 3-5 days. 1.5 days later they were on my doorstep...They were promptly plugged into my GE underhood mounted microwave, now I am back in service! You've won me over and I will tell all my friends about you. Thanks again!
Read less
Was this helpful?
Thank you for voting!
Light Bilbao burned out
-
Stephen from Kennett Square, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Simple repair..took off covering with screwdriver removed the halogen bulb and replaced with the one I ordererd..wish all repairs went so well..
Was this helpful?
Thank you for voting!
circuit shortage shows, i thing it because i heat on the counter too long cause the thermotart not fumctional.
-
Rong from Portland, OR
- Really Easy
- Less than 15 mins
it work ok now
Was this helpful?
Thank you for voting!
Halogen Ligjt bulb needed replacing
-
Rosalie from Oakdale, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
We followed the instructions on your website and it was very quick and easy. Thank you so much for having that information and showing exactly how to replace the Halogen Light Bulb.
Was this helpful?
Thank you for voting!
bulb replacement
-
andrew from malta, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
opened door, removed and replaced bulb
Was this helpful?
Thank you for voting!
Interior lightbulb needed to be replaced
-
Jean from Princeton, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
I could not for the life of me figure out how to get into the light housing so I could replace the bulb, nor did I have any idea which bulb to buy. The manual for this model descibes how to replace the underside lighting but they seem to have left out instructions about the interior. I watched the short "how-to" video on this site, boug
... Read more
ht the bulb that was described and replaced the bulb in five minutes without any issues.
Read less
Was this helpful?
Thank you for voting!