My Orders
CG200 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The paint begin popping of my original grill. My son had a friend that said that he could remove the old paint and repaint for me. Unfortunately in the shuffle of a motorcycle performance shop the grill was lost. I have been trying to get help from Jenn-Aire since March and they just kept saying th
0 of 2 people
found this instruction helpful.
-
Norma from Salisbury, NC
- Really Easy
- Less than 15 mins
Very simple for me!!! Open the box, uncover the new grill and lay it in its place.
Thank you so much!
Thank you so much!
Was this helpful?
Thank you for voting!
old yucky filter
0 of 2 people
found this instruction helpful.
-
Diane from Flower Mound, TX
- Really Easy
- Less than 15 mins
Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!
Was this helpful?
Thank you for voting!
Needed to replace the grease filter!
0 of 2 people
found this instruction helpful.
-
Colette from Annapolis, MD
- Really Easy
- Less than 15 mins
Followed the directions. Piece of cake!!
Was this helpful?
Thank you for voting!
Replace old dingy part
0 of 2 people
found this instruction helpful.
-
Henry from Vancouver, WA
- Really Easy
- Less than 15 mins
Part provided quickly and accurately
Was this helpful?
Thank you for voting!
Downdraft switch on the top of the JennAir inkoperative.
0 of 3 people
found this instruction helpful.
-
Daniel from Fort Walton Beach, FL
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
I verified that there was current running to the switch.
Ordered a new switch,
Replaced the switch.
Had a little problem getting the oneway washers off the pegs but not much.
Saved the cost of a repair man and felt good about myself!
Ordered a new switch,
Replaced the switch.
Had a little problem getting the oneway washers off the pegs but not much.
Saved the cost of a repair man and felt good about myself!
Was this helpful?
Thank you for voting!
The paint had chipped and peeled on the inlet grill
0 of 4 people
found this instruction helpful.
-
Ann from Irvington, NY
- Really Easy
- Less than 15 mins
I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!
Was this helpful?
Thank you for voting!
The Burner Grates were old and bent out of alignment.
-
Carl from Fairfax, VA
- Really Easy
- Less than 15 mins
The repair was as easy as could be. We simply lifted off the old burner grates and set the new ones in their places.
Was this helpful?
Thank you for voting!
rear burner not working
-
Larry from Washington, NH
- Really Easy
- Less than 15 mins
-
Socket set
removed two hexigon screws--removed old burner---placed new burner into stove socket--replaced two screws. Done in about five minutes. Most time used to fine right size socket to fit screws! Fast delivery--easy repair--AND it works!
Was this helpful?
Thank you for voting!
Need Knobs For Electric Stove-Top
-
JUDY from HACIENDA HEIGHTS, CA
- Really Easy
- Less than 15 mins
I did not have the model number and thought I picked the correct knob by the picture. I sent back the knobs and one of my knobs to see if the company can match.
Was this helpful?
Thank you for voting!
one of my Jenn Air knobs melted (gas range top)
-
Gayle from Whitefish, MT
- Really Easy
- Less than 15 mins
pried off the old knob with hubby's needle nosed Leatherman pliers and popped the new one on!
Was this helpful?
Thank you for voting!
Holes in the air filter of our Jenn-Air grill
-
Janice from Ocala, FL
- Really Easy
- Less than 15 mins
Simply pulled the old filter out and put the new filter in.
Was this helpful?
Thank you for voting!
Broke original Knob
-
Robert from Tracy, CA
- Really Easy
- Less than 15 mins
Hardest part of repair was ordering part. The knob arrived the day after my placing order. Not rocket science to replace burner knob.
Was this helpful?
Thank you for voting!
Replacement
-
Barb from Holladay, UT
- Really Easy
- Less than 15 mins
-
Screw drivers
This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,
Was this helpful?
Thank you for voting!
Burner knob replacement
-
Peter from Foster City, CA
- Really Easy
- Less than 15 mins
Inserted new knob on to the stem... very difficult operation taking a great amount of skill. ;-)
Was this helpful?
Thank you for voting!
Worn out burner grates
-
Richard from Omaha, NE
- Really Easy
- Less than 15 mins
Lift and replace. This was the only web site that gave a picture with the correct size of the grates I was looking for. All the other sites gave approximate sizes and universal part numbers instead of the vendor part number. That is why I bought it here. I didn't want to have to return the product because it was off just a bit.
Was this helpful?
Thank you for voting!