Models > CBC980SN1SS

CBC980SN1SS General Electric Range - Overview

Sections of the CBC980SN1SS

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Door Bumper - Black – Part Number: WB2K15
Door Bumper - Black
★★★★★
★★★★★
(3)
PartSelect #: PS241365
Manufacturer #: WB2K15
Sold individually.
$11.48
  Special Order
Bake Element - Push On Terminals - 240V – Part Number: WB44K10005
Bake Element - Push On Terminals - 240V
★★★★★
★★★★★
(19)
PartSelect #: PS249238
Manufacturer #: WB44K10005
The bake element is found on the bottom of the oven and has male spade terminals.
$137.47
  Special Order
Temperature Sensor Kit – Part Number: WB23X5340
Temperature Sensor Kit
★★★★★
★★★★★
(18)
PartSelect #: PS236490
Manufacturer #: WB23X5340
This kit includes the sensor as well as the connectors. NOTE This sensor is 2" long.
$63.20
  Special Order
Light Bulb - 40W – Part Number: 40A15
Light Bulb - 40W
★★★★★
★★★★★
(2)
PartSelect #: PS217532
Manufacturer #: 40A15
$5.52
  Special Order
Rubber Hinge Bumper – Part Number: WB02K10112
Rubber Hinge Bumper
PartSelect #: PS1020952
Manufacturer #: WB02K10112
The rubber bumper sits between the burner and the range itself to ensure the burners do not scrape the stove top. This OEM replacement bumper is sourced directly from the manufacturer, and is sold individually.
$8.05
  Special Order
Broil Element - 240V – Part Number: WB44K10002
Broil Element - 240V
★★★★★
★★★★★
(4)
PartSelect #: PS249236
Manufacturer #: WB44K10002
This broil element is found on the roof of the oven.
$117.12
  Special Order
Infinite Control Switch – Part Number: WB24T10119
Infinite Control Switch
★★★★★
★★★★★
(1)
PartSelect #: PS1016429
Manufacturer #: WB24T10119
$115.19
  Special Order
Temperature Probe – Part Number: WB20X5050
Temperature Probe
★★★★★
★★★★★
(1)
PartSelect #: PS235360
Manufacturer #: WB20X5050
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
$148.16
  Special Order
LEG LEVELER – Part Number: WB02K10182
LEG LEVELER
PartSelect #: PS2339673
Manufacturer #: WB02K10182
$11.48
  Special Order
Large Haliant Burner with Limiter - 8" – Part Number: WB30T10045
Large Haliant Burner with Limiter - 8"
★★★★★
★★★★★
(2)
PartSelect #: PS243903
Manufacturer #: WB30T10045
This haliant burner element is a gneuine OEM replacement part for your stove. This element is 8 inches in diameter. The element lies underneath the stovetop, and will need to be replaced if it stops h...
$202.60
  Special Order
RECEPTACLE PUSH-IN – Part Number: WB08T10026
RECEPTACLE PUSH-IN
★★★★★
★★★★★
(2)
PartSelect #: PS752188
Manufacturer #: WB08T10026
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.
$13.18
  Special Order
Haliant Element - 12 Inch – Part Number: WB30T10130
Haliant Element - 12 Inch
★★★★★
★★★★★
(1)
PartSelect #: PS2321564
Manufacturer #: WB30T10130
This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and...
$225.03
  Special Order

Questions And Answers for CBC980SN1SS

Be the first to ask our experts a question about this model!

Common Symptoms of the CBC980SN1SS

[Viewing 6 of 6]
Element will not heat
Fixed by
these parts
Show All
Little to no heat when baking
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lower bake Element would not heat.
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
Parts Used:
Bake Element - Push On Terminals - 240V
  • Ronald from Nassau, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
214 of 229 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken heating element
1)Turn off power to stove
2)remove 2 bolts holding heating element
3)pull element out of the back of the oven about 8" so that the wire connects is visable
4)pull wire clips off of heating element and remove element from the oven
5)put wire clips on the new heating element
6)push new heating element back into the holes in the back of the oven
7)screw botls back into the oven holding the heating element in place
8)Turn power back on
Parts Used:
Bake Element - Push On Terminals - 240V
  • Paul from anna, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
69 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large burner would not get hot
Repair was very simple. Removed 2 screws under the cooktop, tilt the cooktop back, unplug 4 wires from 8" burner, remove two screws holding retaining clips, install new burner in reverse order. Very simple!
Parts Used:
Large Haliant Burner with Limiter - 8"
  • Kevin from Leominster, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
68 of 88 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!