GE/GE_Thumb/00125748i02.gif
See part 58 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Haliant Element - 12 Inch

★★★★★
★★★★★
1 Review
$225.03   Special Order

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your CBC980SN1SS!
 Fits your CBC980SN1SS!
PartSelect Number PS2321564
Manufacturer Part Number WB30T10130
Manufactured by GE
Product Description

Haliant Element - 12 Inch Specifications

This is a replacement haliant element for your cooktop or range. It is used with flat top ranges, and is found under the glass top of the range. This element is approximately 12 inches in diameter and is sold individually. The haliant surface element supplies the heat needed to the top of the cooktop. If your burner is not lighting up when it is turned on, you may have an issue with the haliant surface element. Be sure to disconnect power to the range before you begin this repair. To replace the element, remove the screws holding the cooktop in place, then remove it. Then, remove the screws holding the burner in place, disconnect the wires and replace the burner. Replace the cooktop and screw it back in to complete the repair.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint.
Part# WB30T10130 replaces these:
AP4344395, 1474216
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

13 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Huarong Li
November 11, 2017
Two large burners (#57, 58) got out order. When turned on but the internal small burn at the center does not heat up. Very likely, the wire is broken. Can i just order the burners? What is the price for each? Thanks, huarong li
For model number JP80DM2BB
Hi Huarong, Thank you for your inquiry. If the center burner is not heating up, you will need to check the switch that turns it on or the element, the wiring between the switch element and element itself with a multimeter. I hope this helps. Thank you and have a great day!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Ulises
January 29, 2018
On my stove part 57 and 58 burners when turned on only outer circle heats up not the center if part is bought and replaced will it work again?
For model number JB850SF4SS
Hi Ulises, Thank you for the question. The issue would be with the Element or the switch that controls the element. I suggest testing both parts with a Multi Meter to determine the defective part. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
December 18, 2019
A follow up to my last question: How do you test the heating element to determine if it has failed? The element is an expensinve part and want to be sure i need to replace it.
For model number GE JB655SKSS
Hello Michael and thanks for writing. Take the elements out of the stove, it's time to check them. Set your multimeter to resistance times one and touch the probes to the wire terminals. This should give you an even reading. Now place one probe on the wire terminal and the other on the element. The needle should not move. If there is no continuity or if the needle moves with these tests, you will need to replace your heating element as this means there is a malfunction. We hope this helps. Please contact us anytime.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Joan
December 7, 2022
I am not sure of the size it is the big burner that went out on my stove. I’m not sure of the size if you could help me with it I appreciate it. Thank you.
For model number PB970BOM2BB
Hello Joan, thank you for reaching out. We have researched your model and found that this element, part number PS2321564, is approximately 12 inches in diameter. Please contact customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Robert
9 days ago
The twelve inch dual heating elemnet only the outside ( or hi) is working. Should I replace both the switch and the element? And what part numbers do I need? Thank you!
For model number Jb655sk2ss
Hello Robert, thank you for reaching out. The issue seems to be with the Surface Element and you may need to replace it, the part number is PS2321564. If that does not help, we would recommend replacing the Element Control Switch, part number PS11729102. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tom
October 29, 2019
Dual ring surface elements can not reduce heat on either ring with control knob
For model number JB655DK3WW
Hello Tom, Thank you for the question, In most cases this means the switch that controls the element will need to be replaced. PartSelect Number PS11729102. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jean
November 16, 2019
Outside ring on large front burner works, small inside element will not heat ???what to do
For model number JB750SJ4SS
Hi Jean, most likely cause is a burner switch part PS236754. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Michael
December 18, 2019
Do the range top heating elements have a thermostat control. It seems one of ours may be overheating. Can this crack the glass top?
For model number GE JB655SKSS
Hello Michael and thanks for writing. No, there is not a thermostat there. It certainly sounds more like a faulty element check for signs of damage and replace it if needed. Yes, it could damage the glass top. We hope this helps. Please contact us anytime. We do carry related parts for units just like yours. For example, part number PS8754842 Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Crystal
July 2, 2021
My burner is stuck on the "high" setting and won't lower no matter the knob position. Is this a burner problem or something with the wiring, or something else?
For model number JB860DJ1WW
Hello Crystal, Thank you for the question. This is an indication the Switch that controls the Element is defective and will need to be replaced. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Laura
December 16, 2021
My largest burner 11 1/4 " will only light the outer last three rings, the inside is dark. The only part that I can find is Haliant Element 12" PS2321564. Clueless HELP. Thanks Laura
For model number CBC980ST2SS
Hello Laura, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2321564. The 12" is a estimate size, this is guaranteed to fit your model for the Largest Element. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 6 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Baking element and dual stovetop burner were fried
Baking element:First, turn off your breaker so you don't get injured. Using a small nut driver, remove the two screws that hold the element into the back of the oven. Once the screws are out, the element slides out, toward the oven opening. Be careful not to pull too hard, or the wires could disconnect from the back and be difficult to retrieve. Once the wires are exposed, disconnect them from the terminals. Attach them back to the new element, and put it back in. EASY For the stovetop, this is a glass top, so the burners are underneath. There are two small screws on the underside of the stove top, where the oven door closes. Remove those screws and then lift the front of the entire stove top. It will hinge at the back. There are two screws and little metal brackets that hold the burner in place. Remove those screws and brackets, disconnect the wires, and be sure to remember which wire goes where. Reattach the wires and screw the brackets back into the burner. Refasten the stovetop and you are good to go.
Other Parts Used:
Bake Element - Push On Terminals - 240V
  • Matt from Westr Grove, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
37 of 43 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
large portion of my duel heat burner went bad
easily lifted the top of the stove after removing two small screws in front of the stove.removed screws holding burner in place , disconnected some wires and replaced burner. be sure to turn off the power before beginning this project
Other Parts Used:
  • matthew from waterford, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
18 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element went out in glass top stove.
Unscrewed the stove top and replaced the element.
Other Parts Used:
  • Aleshia from O BRIEN, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large right burner would only light in the outside and would not stay on
Ordered the part. Received the box damaged and did not realize the part was damaged until our son came all the way from Columbus Ohio to install it. We ordered another part which came in a timely manner. Even though I reported the problem and told them that we are not very computer literate they still would not accept that the part was damaged until we sent a picture. Our son came back from Columbus to install the new part which took about an hour. He took pictures which I was then able to send. They then asked for a serial number. I had already sent all the numbers from the part but that is when they said they wanted the serial number from the stove. We are elderly and getting that required me getting on my hands and knees to get it near the floor. Luckily I was able to get up. After multiple emails I now have to send the part back. Good luck to anyone working with this company. I will be waiting for them to reimburse me for the defective part.
Other Parts Used:
  • JoAnne from LAMBERTVILLE, MI
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
12" Haliant Element would only work on the outer ring.
Watched repair videos on YouTube to prepare. The repair was very easy.
Other Parts Used:
  • William from RICHMOND, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inside burner did not heat
Disconnect old burner and reconnect new one
Other Parts Used:
  • Roberto L from LAUREL, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2321564
Manufacturer Part Number: WB30T10130
Brand
Model Number
Description
General Electric
CBC980SN1SS
Range
General Electric
CBC980SN2SS
Range
General Electric
CBC980SN3SS
Range
General Electric
CBC980ST1SS
Range
General Electric
CBC980ST2SS
Range
General Electric
CBC980ST3SS
Range
General Electric
CBC980ST5SS
Range
General Electric
CBC980ST6SS
Range
General Electric
CBC980ST7SS
Range
General Electric
CCS975SD1SS
Range
General Electric
CCS975SD2SS
Range
General Electric
CCS975SD3SS
Range
Hotpoint
CS975SD1SS
Range
General Electric
CS975SD2SS
Range - ELECTRIC RANGE
General Electric
CS975SD3SS
Range - ELECTRIC RANGE
Hotpoint
CS980SN1SS
Range
Hotpoint
CS980SN2SS
Range
Hotpoint
CS980SN3SS
Range
Hotpoint
CS980ST1SS
Range
Hotpoint
CS980ST2SS
Range
Hotpoint
CS980ST3SS
Range
General Electric
CS980ST4SS
Range - ELECTRIC RANGE
General Electric
CS980ST5SS
Range - ELECTRIC RANGE
General Electric
CS980ST6SS
Range - ELECTRIC RANGE
General Electric
CS980ST7SS
Range
General Electric
CS980ST8SS
Range
General Electric
ECBP82DM2WW
Range - Electric
General Electric
ECBP82DP1WW
Range
General Electric
ECBP82SM2SS
Range - Electric
General Electric
ECBP82SP1SS
Range

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service