My Orders
- Home
- AQC2213TEW04
- Instructions
AQC2213TEW04 Amana Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Compressor "grounded" and quit running
59 of 118 people
found this instruction helpful.
-
Mike from Baytown, TX
- Easy
- 1- 2 hours
-
Nutdriver, Pliers, Wrench (Adjustable)
Replaced the compressor with the new one I purchased from you. Installed new parts and recharged unit. The refrigerator / freezer is working better than new. Thanks for the great deal on the compressor. It was here in 3 days. All the parts fit exactly and had no difficulty in the installation or startup. The directions for the wirin
... Read more
g were a great help also. Thanks again.
Read less
Was this helpful?
Thank you for voting!
light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.
7 of 10 people
found this instruction helpful.
-
Henry from Monrovia, CA
- Easy
- Less than 15 mins
-
Pliers
pulled switch from door ,unpluged it and then plued in new switch.
Was this helpful?
Thank you for voting!
Compressor would short cycle after overload tripped
2 of 2 people
found this instruction helpful.
-
Eric from VALLONIA, IN
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Test original overload with meter to see if voltage drops out when overload trips. It did. Measured amp draw to verify compressor load was with in range, it was. New overload no longer trips during compressor start up.
Was this helpful?
Thank you for voting!