AQC2213TEW04 Amana Freezer - Overview

Diagrams for AQC2213TEW04

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Screw – Part Number: WPW10031790
$10.95
In Stock
Screw
Part #WPW10031790
Freezer Temperature Control Thermostat – Part Number: WP4-35940-001
$201.91
On Order
Freezer Temperature Control Thermostat
★★★★★
★★★★★
(1)
Part #WP4-35940-001
This part maintains the proper temperature. When the refrigerator reaches the desired temperature, this part interrupts the flow of electricity to the compressor which stops the cooling process.
Freezer Lid Gasket – Part Number: 4-35260-006
$271.71
In Stock
Freezer Lid Gasket
Part #4-35260-006
The freezer lid gasket creates a seal around the lid to prevent warm air from entering the freezer.
Refrigerator Overload – Part Number: WP2183456
$95.26
Special Order
Refrigerator Overload
★★★★★
★★★★★
(1)
Part #WP2183456
This part helps protect the motor from overheating.
SOCKET – Part Number: 2005042
No Longer Available
SOCKET
Part #2005042
Compressor Kit – Part Number: W10309994
$792.62
In Stock
Compressor Kit
Part #W10309994
This is the mechanics (motor/engine) of the cooling system. It kicks in whenever the thermostat demands cooling. This kit includes the compressor, relay, overload, drier filter, 4 pieces of tubing and mounting grommets. ***NOTE: This part needs to be installed by a trained professional in appliance repair. It requires special tools and knowledge to do so.
Light Bulb – Part Number: W10873798
$19.76
Special Order
Light Bulb
Part #W10873798
Relay Start – Part Number: WPW10466655
$89.28
In Stock
Relay Start
Part #WPW10466655
Door Hinge – Part Number: W11192185
$205.29
Special Order
Door Hinge
Part #W11192185
Filter Drier Tube – Part Number: W10843121
$54.95
In Stock
Filter Drier Tube
★★★★★
★★★★★
(1)
Part #W10843121
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Compressor "grounded" and quit running
59 of 118 people found this instruction helpful.
  • Mike from Baytown, TX
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Wrench (Adjustable)
Replaced the compressor with the new one I purchased from you. Installed new parts and recharged unit. The refrigerator / freezer is working better than new. Thanks for the great deal on the compressor. It was here in 3 days. All the parts fit exactly and had no difficulty in the installation or startup. The directions for the wirin g were a great help also. Thanks again.
Was this helpful?
Thank you for voting!
light switch metal was corroaded by the moisture. there was no contact so light wouldnot turn on.
7 of 10 people found this instruction helpful.
  • Henry from Monrovia, CA
  • Easy
  • Less than 15 mins
  • Pliers
pulled switch from door ,unpluged it and then plued in new switch.
Was this helpful?
Thank you for voting!
Compressor would short cycle after overload tripped
2 of 2 people found this instruction helpful.
  • Eric from VALLONIA, IN
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Test original overload with meter to see if voltage drops out when overload trips. It did. Measured amp draw to verify compressor load was with in range, it was. New overload no longer trips during compressor start up.
Was this helpful?
Thank you for voting!