917279100 Craftsman - Overview

Models starting with 917279100

Click on the best match to narrow your results.

Parts for models starting with 917279100

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
PLUG – Part Number: 532123935
No Longer Available
PLUG
Part #532123935
WASHER – Part Number: 819112410
No Longer Available
WASHER
Part #819112410
BRACKET PIVOT SEAT – Part Number: 532140551
No Longer Available
BRACKET PIVOT SEAT
Part #532140551
KNOB INF 3/8-16 UN – Part Number: 532138057
No Longer Available
KNOB INF 3/8-16 UN
Part #532138057
CAP-SPRING – Part Number: 532124238
No Longer Available
CAP-SPRING
Part #532124238
Ammeter – Part Number: 177500
No Longer Available
Ammeter
Part #177500
Wheel Hub – Part Number: 140507
No Longer Available
Wheel Hub
Part #140507
Lawn Tractor Headlight Wire Harness – Part Number: 175688
No Longer Available
Bolt – Part Number: 72110610
No Longer Available
Bolt
Part #72110610
Lawn Tractor Spacer – Part Number: 136518
No Longer Available
Lawn Tractor Spacer
Part #136518
Lawn Tractor Push-in Rivet – Part Number: 133835
No Longer Available
Lawn Tractor Transaxle Pulley – Part Number: 143995
No Longer Available
View More

Common Symptoms of models starting with 917279100

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel bushings were bad
29 of 48 people found this instruction helpful.
  • Anthony from OLIVEHILL, TN
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Read less
Was this helpful?
Thank you for voting!
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Was this helpful?
Thank you for voting!
Front wheels, too much end play
10 of 39 people found this instruction helpful.
  • Frederick from BINGHAMTON, NY
  • Very Easy
  • Less than 15 mins
Shimmed the wheels out on axle.. No more slop.
Was this helpful?
Thank you for voting!
View More