79571099111 Kenmore Refrigerator - Instructions

All Instructions for the 79571099111
16 - 30 of 79

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator light not coming on when door opens.
5 of 8 people found this instruction helpful.
  • John from BONITA SPGS, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Unplugged the refrigerator. Used small flat head screw driver to push the front tab of the old switch in and pulled it out with pliers. Detached and reattached the wires to the switch. Reinserted back into hole. Plugged refrigerator back in to power. All good.
Was this helpful?
Thank you for voting!
ICE MAKER STOP WORKING AND MAKING A LOT OF NOISE WHEN TRYING TO DUMP AND WAS HANGING UP TOOK IT APART AND FOUND THE WORM GEAR WAS STRIPED
4 of 5 people found this instruction helpful.
  • William from DICKINSON, TX
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
EASY PEASEY WATCHED INSTALL VIDEO NO PROBLEMS WORKING GREAT THANK YOU
Was this helpful?
Thank you for voting!
The spring broke
4 of 5 people found this instruction helpful.
  • Steven from YORBA LINDA, CA
  • Very Difficult
  • 30 - 60 mins
I could not as the spring was too large and did not fit. Calls to Parts Select were not very useful as I described the problem and was told that that was the correct part, even though I supplied photos.
Rather than research the problem, I was told to call LG. Not exactly the response I expected from an authorized distributor. By the way, LG service said to call an authorized distributor, so round and round I go Please help.
Was this helpful?
Thank you for voting!
Refrigerator light not working. If I would flick the button it would go on for a minute but not stay on.
4 of 5 people found this instruction helpful.
  • Dawn from NORTH BRANCH, MN
  • Easy
  • 15 - 30 mins
The old switch was a little hard to get out....took me a couple tries. I couldn’t move the frig out to unplug it, so just shut the power off in the kitchen. But, I was happy that’s what the problem was and so happy to have the light back on......it was probably three years it didn’t work!
Was this helpful?
Thank you for voting!
Light doesn’t come on when fridge door opens
4 of 6 people found this instruction helpful.
  • Lloyd G from QUEENS VLG, NY
  • Really Easy
  • 15 - 30 mins
Pulled fridge away from wall, unplug electrical connection, open fridge door, use knife to prize out door switch, pull off and replace switch from electrical wiring.
Was this helpful?
Thank you for voting!
Broken Flapper Spring on Door
3 of 3 people found this instruction helpful.
  • Edgar from FLAGSTAFF, AZ
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Initially the wrong spring was sent. The coiled spring must have COUNTERCLOCKWISE wind for this refrigerator door. A spring with a clockwise wind was initially sent. Partselect very promptly and efficiently corrected the problem at their expense. For this reason I give them a strong recommendation.
View their instructions on youtube.
Was this helpful?
Thank you for voting!
interior light switch did not turn off light in ref
4 of 6 people found this instruction helpful.
  • Timothy from SUSANVILLE, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
pried out old switch, disconnected wires ,placed wires on new switch
Was this helpful?
Thank you for voting!
Replace water filter
4 of 6 people found this instruction helpful.
  • Bill from FORT SMITH, AR
  • Very Easy
  • Less than 15 mins
Followed directions that came with the filter. Did remove the top shelf for easier access. Very simple and quick.
Was this helpful?
Thank you for voting!
Door switch would not turn on interior refrigerator light.
3 of 4 people found this instruction helpful.
  • Jane from SHORELINE, WA
  • Very Easy
  • Less than 15 mins
I had previously watched a YouTube video (do this first!!) on a similar Kenmore model so I knew what to look out for: (1) turned off power, (2) took thin putty knife to slip under outer lip of switch (most screwdrivers are too thick), (3) wiggled switch at front end to release the tab, (4) unplugged from the socket, (5) plugged in new sw itch, (6) popped new switch back into door, (7) turned on power. Voila !! Super easy. I couldn't believe it.
Was this helpful?
Thank you for voting!
Ice would not fall
9 of 22 people found this instruction helpful.
  • Bob from Phoenix, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replaced Ice maker unit
Was this helpful?
Thank you for voting!
Blower motor out on condenser
4 of 7 people found this instruction helpful.
  • George from WHITE BIRD, ID
  • Easy
  • 30 - 60 mins
  • Screw drivers
followed detailed movie from Utube video
Was this helpful?
Thank you for voting!
Low water pressure which in turn led to no water and no ice.
7 of 16 people found this instruction helpful.
  • Daniel from ABERDEEN, WA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
Unplugged fridge, shut off water supply disconnected water supply from fridge. Remove screws that hold lower cover on back of fridge, removed screws holding valve assembly to fridge. Disconnect two electrical connections, remove black c-clip on out flow water line, lift fitting on outflow line side and pull water line off. Replace with va lve assembly in reverse order
Was this helpful?
Thank you for voting!
Broken mullion spring
2 of 2 people found this instruction helpful.
  • Steve from TRENTON, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I watched a couple of You Tube videos on how to make the repair, ordered a new spring from Part Select, and installed the new spring when it arrived. Took about 5 minutes for the actual repair.

Check the spring when it arrives. The first one I received was wound the wrong direction. Called customer service and they were supe r. Refunded the charge for the first spring, found the correct one for me, and mailed it out.
Was this helpful?
Thank you for voting!
Fridge door wouldn’t shut
2 of 2 people found this instruction helpful.
  • Judy from EGG HBR TWP, NJ
  • Really Easy
  • 30 - 60 mins
Took old door strip (spring broke) and installed new with spring It went well and was working in less than 5 minutes
Was this helpful?
Thank you for voting!
Replaced hose and it was exactly what I needed.
3 of 5 people found this instruction helpful.
  • Donald from CLEBURNE, TX
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Replaced old hose and installed the new one. Was very simple with the instructions in your email..... step by step, could not of been any similar.... you guys rock
Was this helpful?
Thank you for voting!
All Instructions for the 79571099111
16 - 30 of 79