79043 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
rusty bowls
0 of 2 people
found this instruction helpful.
-
Monty from Kenton, OK
- Really Easy
- Less than 15 mins
very easy
Other Parts Used:
Was this helpful?
Thank you for voting!
Intermittent heating element function
0 of 2 people
found this instruction helpful.
-
Jeffrey from Pittsburgh, PA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Instructions included with terminal block assembly. Toughest part was to strip the insulator off of the old wires on the stove. I was originally going to just purchase one but after looking at the other terminal blocks and seeing the burnt insulation and some of the wire strands, I just replaced all 4. PartSelect customer sevice was ve
... Read more
ry helpful to confirm the correct part number I needed for my stove.
Read less
Was this helpful?
Thank you for voting!
Frig door not closing on its own accompanied by grinding sound
1 of 6 people
found this instruction helpful.
-
Joseph from Pennsville, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
IMPORTANT: REPAIR EASIER WITH ASSISTANT! Pull frig from kitchen cabinets & unplug. Remove food from freezer & frig doors. Have assistant hold freezer door closed against freezer. Remove hinge cap from top of freezer along with hardware using socket wrench. Carefully lift freezer door from hardware that joins the bottom of the freezer door
... Read more
to the top of the frig door. Rest freezer door upright off to the side. Have assistant open frig door & SUPPORT BOTTOM. Remove hardware from top of frig using crescent wrench & screwdriver. Carefully lift frig door off joint & lay on side to gain access to hardware on bottom. Remove hardware using a screwdriver & replace worn nylon bushing. Reverse disassembly steps. Remove frig & freezer door shelves & clean inside. Clean outside frig, especially the back vents. Clean the floor where frig lives & push back into place. Enjoy clean SELF-CLOSING, NON-GRINDING frig door!
Read less
Was this helpful?
Thank you for voting!
Renewed drip pans
1 of 6 people
found this instruction helpful.
-
Frank from Winter Garden, FL
- Really Easy
- Less than 15 mins
Replace the old ones with the new ones. Was VERY impressed with the quick delivery!!
Other Parts Used:
Was this helpful?
Thank you for voting!
heating elements not working
1 of 7 people
found this instruction helpful.
-
christopher from cincinnati, OH
- Easy
- Less than 15 mins
-
Pliers
prepared the parts as directions displayed, removed the heating coils and popped the hood on the range, simple curcit 2 wires in to the main harness for each coil. snip, plug and twist add heat wrap to seal the new conections and done very simple fix saved me buying another oven....for now
Was this helpful?
Thank you for voting!
Control will not work - only clock blinks
0 of 4 people
found this instruction helpful.
-
Sue from Lampasas, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Was this helpful?
Thank you for voting!
Replace terminal block and burner unit.
-
James from Williamsville, VT
- Really Easy
- 15 - 30 mins
-
Screw drivers
Very simply following the online video instructions.
Was this helpful?
Thank you for voting!
burner would not heat up
-
MARGARET from MILFORD, PA
- Really Easy
- 15 - 30 mins
-
Screw drivers
simple, removed a few screw's, unplugged old burner, plugged in the new one. that was basically it. easy!
Was this helpful?
Thank you for voting!
Three terminal blocks burned out (disintegrated) on electric stove
-
Valentina from Riverside, CA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!!
... Read more
I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!
Read less
Was this helpful?
Thank you for voting!
drip bowl purchased at local store was wrong size
-
james from lockport, NY
- Really Easy
- Less than 15 mins
purchased correct part from PartSelect and it fit like a glove!
Was this helpful?
Thank you for voting!
drip bowls on stove rusty
-
Kenneth from Osseo, WI
- Really Easy
- Less than 15 mins
they were for my 90 year old mom. she dropped them in by herself, perfect fit....thanks very much
Other Parts Used:
Was this helpful?
Thank you for voting!
Replaced burner block
-
Glenn from Fossil, OR
- Really Easy
- Less than 15 mins
-
Screw drivers
Looked at the instructions and cut the wires, put the new wires in the block, attached the block to the range, put the new wires to the range wires using the wire nuts. I plugged the element into the block turned on the power, tried the element and it worked. It was really a easy repair.
Was this helpful?
Thank you for voting!
drip pans old and rusted
-
linda from decatur, AL
- Really Easy
- Less than 15 mins
unplugged the elements, removed drip pans, replaced with new drip pans. plugged back in elements. took no skills or effort. the parts were ordered on-line one afternoon and were on my doorstep the next morning. I had been unable to find drip pans that fit my stove and was thrilled that they fit and came so quickly and were reasonably pric
... Read more
ed.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip Bowl Replacement
-
Jennifer from Arena, WI
- Really Easy
- Less than 15 mins
I could not find the larger size universal drip bowl to fit the 8" burners on my stove. This product replacement is perfect.
Was this helpful?
Thank you for voting!
Couldn't find drip pans that fit
-
Heather from Springfield, TN
- Really Easy
- Less than 15 mins
I went to all of the do-it yourself stores and spent a bunch of money on aftermarket drip pans only to find out that none of them fit. I came up on your website and also called customer service. The found the right part and mailed it too me. They fit perfectly. No more burnt and rusty drip pans. I know where to go for parts now.
Other Parts Used:
Was this helpful?
Thank you for voting!