1. Home
  2. 77-498
  3. Instructions

77-498 Tappan Microwave Oven Combo - Instructions

All Instructions for the 77-498
61 - 75 of 143

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original rear glides had broken
0 of 1 people found this instruction helpful.
  • Jeff from Irvine, CA
  • Really Easy
  • Less than 15 mins
Took the new parts out of the bags, slipped them into place and had the drawer working flawlessly in less than 5 minutes!
I surprised myself.
Was this helpful?
Thank you for voting!
Broken drawer glide
0 of 1 people found this instruction helpful.
  • Jeffrey from West Kingston, RI
  • Really Easy
  • Less than 15 mins
First i removed the drawer. Then i removed the broken drawer glide and replaced it with the new one. Then i put the drawer back! The parts were a perfect match...
Was this helpful?
Thank you for voting!
Broken drawer glide
0 of 1 people found this instruction helpful.
  • Myles from Twin Falls, ID
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I used a screw driver to pop the broken glide out and then snapped in the new one. The repair took all of about 30 seconds. It probably would have taken even less time if the former owner had not epoxied the broken piece in place.
Was this helpful?
Thank you for voting!
I accidently threw away the drawer glide, when it fell off one day b/c I didn't know what it was. Later on when I started pulling out the bottom stove drawer, I discovered that it wasn't gliding properly....duh...
0 of 1 people found this instruction helpful.
  • Reginal from Tampa, FL
  • Really Easy
  • Less than 15 mins
I just placed the new glider in place and put the drawer back on its hinges and it was good to go... my wife was extremely happy
Was this helpful?
Thank you for voting!
drawer glides went in with just a push with a finger ,works great
0 of 1 people found this instruction helpful.
  • carl from mashpee, MA
  • Really Easy
  • Less than 15 mins
pushed the glides in the proper holes and ,they work great now ,drawer opens and closes as easy as it should. will buy from again.
Was this helpful?
Thank you for voting!
Broken-Missing Front Drawer Glides
0 of 1 people found this instruction helpful.
  • Michael from Anchorage, AK
  • Really Easy
  • Less than 15 mins
They snap right into place in the holes at the front of the stove and the drawer is then slid back onto the glides and works properly once again.
Was this helpful?
Thank you for voting!
the drawer glides were borken
0 of 1 people found this instruction helpful.
  • SHEILA from BECKLEY, WV
  • Really Easy
  • Less than 15 mins
I removed the brokne ones and replaced them with the new ones.
I appreciated PartSelect giving a picture of the parts so i didn't have to search for the part number.
Was this helpful?
Thank you for voting!
Broken Drawer Glide
0 of 1 people found this instruction helpful.
  • Barbara from Fairbanks, AK
  • Really Easy
  • Less than 15 mins
Took no time at all to fix and is as good as new. Hooray!
Was this helpful?
Thank you for voting!
drawer glides broke
0 of 1 people found this instruction helpful.
  • Charles from Greenfield, IN
  • Really Easy
  • Less than 15 mins
took old parts out and popped in new glides.
Was this helpful?
Thank you for voting!
Drawer Glide Broke..
0 of 1 people found this instruction helpful.
  • Rita from East Boston, MA
  • Really Easy
  • Less than 15 mins
No problem..... I just had to slide the new one in..It took all of 5 minutes...
I searched so many different places for the part until a friend told me about Part Select!!!
Thank you so much...
Was this helpful?
Thank you for voting!
Broken drawer glide
1 of 4 people found this instruction helpful.
  • Richard from Greenwich, NY
  • Really Easy
  • Less than 15 mins
Fed ex dropped the part off at 7 one night, had it repaired by 7:05. Popped the broken glide off, popped the new one in. Easier than easy. Took longer to empty the drawer and remove it than to do the repair.
Was this helpful?
Thank you for voting!
Best deal on the internet for a factory grate.
0 of 1 people found this instruction helpful.
  • Aaron from Miamisburg, OH
  • Really Easy
  • Less than 15 mins
Ge wanted over a hundred dollars for the same part you charged only $80. Thanks. I'll be buying again.
Was this helpful?
Thank you for voting!
I had a broken front drawer glide on my range.
0 of 1 people found this instruction helpful.
  • Mike from Everett, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Easy repair, I used a screw driver to pry out the broken part and no tools were required to put in the new part.
Was this helpful?
Thank you for voting!
drawer wouldn't fit flush
0 of 1 people found this instruction helpful.
  • Gary from Milford, DE
  • Really Easy
  • Less than 15 mins
  • Pliers
removed drawer - removed broken drawer glides. new glides clip in very easy
Was this helpful?
Thank you for voting!
Drawer was hard to close
0 of 1 people found this instruction helpful.
  • Catherine from Washington, GA
  • Really Easy
  • Less than 15 mins
I am a 74 year old single woman. I removed the drawer and replaced the guide which has been missing for some time. Wish I had none about your company a long time ago.
Thank you
Was this helpful?
Thank you for voting!
All Instructions for the 77-498
61 - 75 of 143