Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Racks needed to be replaced.
11 of 14 peoplefound this instruction helpful.
Peter from Chicago, IL
Really Easy
Less than 15 mins
Slide out the old; slide in the new!
Was this helpful?
Thank you for voting!
Draw Glide Broken Off Bottom Drawer.
9 of 11 peoplefound this instruction helpful.
Kathleen from fall river, MA
Really Easy
Less than 15 mins
New part arrived, opened pkg. , Pulled drawer out. . . Snapped in new parts. . . . Done!! Saved myself $100. 00.
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 peoplefound this instruction helpful.
Lise from CEDAR GROVE, NJ
Very Easy
Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
Oven racks rusted
11 of 21 peoplefound this instruction helpful.
Wendell from Ocala, FL
Really Easy
Less than 15 mins
Ordered new racks and replaced them.
Was this helpful?
Thank you for voting!
Broken Drawer Glide
6 of 6 peoplefound this instruction helpful.
Sharon from Hamlin, NY
Really Easy
Less than 15 mins
It snapped right into the drawer, was very easy
Was this helpful?
Thank you for voting!
Element burned out
6 of 7 peoplefound this instruction helpful.
James from Colonial Beach, VA
Easy
15 - 30 mins
Nutdriver
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. The I reversed the process to install the new element which was exactly the same as the burned out one. At first I was on the verge of replacing the whole stove before I decided to google " ra
... Read morenge heating elements". I ordered the part from your company and it arrived promptly. Needless to say, I am thrilled that I don't have to buy a new stove. This one now works perfectly!
Read less
Was this helpful?
Thank you for voting!
The elements were not heating up
6 of 8 peoplefound this instruction helpful.
Tanya from KALISPELL, MT
Really Easy
15 - 30 mins
Screw drivers
It was really easy just unplugged it took off the back cover changed the part out put back cover on plugged it in and the elements were working great!
Was this helpful?
Thank you for voting!
Refrigerator Light bulb went out
7 of 12 peoplefound this instruction helpful.
ANGELA from MEBANE, NC
Very Easy
Less than 15 mins
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
Was this helpful?
Thank you for voting!
Glides broke on lower storage drawer
5 of 6 peoplefound this instruction helpful.
James from WEST BEND, WI
Really Easy
Less than 15 mins
The front glides easily snap into a hole on the sides of the range. The rear glides easily snap onto the sides of the lower rear of the drawer.
Oven wires arced and caused the terminal block to melt and become detached from the back of the range
3 of 3 peoplefound this instruction helpful.
Daniel from Falmouth, MA
A Bit Difficult
30 - 60 mins
Nutdriver, Pliers, Screw drivers, Wrench set
Removed the wires that I could, then terminal block. Installing the new terminal block was very easy; however the wires that arced were fused to the terminal bock screws and needed to be cut and new connectors had to be put on the wires to allow them to be reattached to the block safely. Once all was replaced and reinstalled the oven
... Read more has worked great. The length of the repair was increased because of the melted parts and having to run to the store to get the new wire connectors big enough to fit on the wires. If we were simply replacing the block and had not encountered the melted ends, it would have been a very quick and easy repair.
Read less
Was this helpful?
Thank you for voting!
Broiler element burned out
3 of 3 peoplefound this instruction helpful.
Trisha from Shelbyville, TN
Very Easy
30 - 60 mins
Screw drivers
Just took the old one out & put the new one in . Just a few screws to remove & put them back when replacing to new broil element , and were back up and cooking :)
My Orders
