Models > 66517425792 > Instructions

66517425792 Kenmore Dishwasher - Instructions

All Instructions for the 66517425792
76 - 90 of 129
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
4 broken wheel assemblies on upper rack
Snapped them in place....2 minutes....ordered the parts 2PM on a friday and they arrived 11AM Saturday...couldn't believe it! Thanks!
Parts Used:
Upper Dishrack Roller Assembly
  • Jeffrey from Little Egg Harbor, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke one part trying to install
no tools necessary buy instructions would have brrn helpful
Parts Used:
Pin (Lid Hinge)
  • dwight from onaka, SD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper dishrack broke
Order was very easy, received on time. Repari was sucessful.Thank you!
Parts Used:
Upper Dishrack Roller Assembly
  • Veronica from Miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
seals were leaking,dry rotted from setting five years without using.
I Disconected The 3' hose Behind Impellor.Unscrew Cap Holding Impellor In. Pull It Out, Replce With New One.Put It Back Together In Reverse
Parts Used:
IMPELLER
  • mike from seymour, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front door panel was missing
I removed the cardboard insert, put the new front panel on and replaced the tabs. That was it!
Parts Used:
Door Panel Insert
  • Crystal from Bowman, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My Dishwasher Started Leaking Out The Bottom Of The Impeller Assembly.
I went on line and found the partselect website and was able to identify the defective parts using the schematic drawings. I ordered the parts and in about an hour I had reassembled the dishwasher and had it running again much to the joy of my wife and children. (No more washing dishes by hand!). I also purchased the touch-up paint and tine tips and now the washer looks and runs like it did when I purchased it.
Parts Used:
Vinyl Touch-Up White Tine Tips IMPELLER Seal, Drain Cover RING
  • John from Eldersburg, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
6 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not cleaning like it should
Replaced old worn out parts with new ones.
Now it cleans like it should once again.
Parts Used:
Lower Spray Arm with Tower
  • Arnaud from FR SETTLEMENT, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Didn't look good with the new big panel changed.
Came home and my husband had it all done. He said it was simple and it looks bran new again. Very satisfied.
Parts Used:
Door Panel Insert
  • Marjorie from North Grosvenordale, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Long spring broke that pulls soap cup open
Opened the door by using a star screwdriver. Pulled the door inside from the outside. Located the broken spring, put in new one (be very carefull to see how the insides are put together..makes life ALOT easier), and carefully put back together.
Parts Used:
Door Spring
  • mark from ickesburg, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Faucet adapter leaked
Replaced the faucet adapter, works fine
Parts Used:
Faucet Adapter
  • Ed from North East, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Front panel was dented badly
The bottom trim piece popped off easily and I removed the damaged panel and replaced it with the new one. I snapped on the trim piece and I was done. It took less than five minutes.
Parts Used:
Door Panel Insert
  • Michael from Ridge Manor, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water leak
Got on the computer, located your site and read the repair stories.Thought, I can do this. Ordered the impeller and seal kit. I followed the same procedures as your other customers, however, when I turned it on for a test it still leaked. Went out looked for a new dishwasher, for $389.00. After talking to my wife,(been married over 60 years)decided to try one more time. Went through the same steps. Loosen the plastic ring remove The revolving spraying arm, tipped on the front to get to the bottom. mopped up the water,disconected water, electric, and hoses. Pulled the motor and pump unit, disassembled the pump unit,then I realized I had installed the rubber and plastic bearing backwards. The rubber to rubber wore out real fast. Ordered a new seal kit (no impeller) Put it all back together and it works just like it did 19 years ago. Total cost less than $60.00. It is a good feeling when your able to fix somthing like this, especially ehen your a fat 83 year old. I would like to meet the person that changed this in a half hour.
Parts Used:
Seal Seat Ring
  • lawrence from brookings, OR
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
Upper dish rack roller assembly broke
Very simple, removed old broken roller and snapped into place the new roller, less than 5 minutes to fix
Parts Used:
Upper Dishrack Roller Assembly
  • Mike from Coral springs, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dishwasher lower rack - rusting
Took out old dishwasher rack and replaced with new.
Parts Used:
Lower Dishrack Kit
  • Eleanor from Elko, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Stopping in the middle of cycle. Finally quit completely.
Turned off power to dishwasher. Removed inner door panel. Cut wires as directed and installed new switches. Also installed new spring on soap door opener. Reassembled, ran and tested. Take your time, this repair is pretty simple.
Parts Used:
Door Switch Kit
  • Robert from Sacramento, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 66517425792
76 - 90 of 129
Back to Top