66213043K112 Dishwasher - Instructions

followed enclosed directions. needed to replace both side as repair parts come as complete set. might add that repair part is stainless steel and easy to work with

the delivery time was terrific for the first thing. I placed all the parts out on the table and the instructions were very direct and simple to follow. it took more time to figure out the removal of the old plastic parts, but was very easy after you find where to place the screw driver to open the side cover and let the old adjuster fall apart. The new parts went in as directed by the directions, and pictures, very simply and it only takes a few minutes to complete and reinstall the top rack in the dishwasher. I was very pleased with all of the service.

Basically I just had to look at the instructions that came with replacement kit and follow the directions as shown.The included pictures for the kit were not very clear. Poor quality ! That being said, this install went very smooth, The directions were easy to understand and I had this dishwasher back up and running in no time. It was a pleasure to actually get this unit fixed so quickly. Thank You !!

bought the adjuster kit and the hardest part was taking off the old pieces. the new pieces went on very easily and smoothly. I am a female that has done a lot of house projects and this was not difficult at all.

First of all, the initial manufacture of the shelf rack rollers was substandard, and I replaced the left side less than a year ago, and both left and right side failed (rollers came off, causing shelf to drop down....not good!) When I "reordered' the parts the second time, I was pleased to see a "kit" was sent to replace "both" sides! Smart! I needed no tools, replaced the right side in 15 minutes, and the left side in 3 minutes. Much better than original parts! Thanks guys!!

It was so easy! Broke of the already broken supports and followed the easy step by step instructions with pictures.

Searched YouTube and followed a YouTube video step by step. YouTube had the exact same part replacement instructions. Paper instructions were difficult to read, but YouTube repairman takes you through procedure with closeup video.

Followed the written instructions provided with the new adjuster replacement kit. No problems with the removal and replacement of the adjusters.

tried to follow the instruction that came with the parts, to no avail? it would have been better to send a note that said good luck. the only part that helped was the part that said remove the old parts. after that is was just a fit and test, fit and test, fit and test, only because of my expert analytical abilities was i able to fit it all together. please draw up better instructions. it fits good and works well.

The enclosed instructions were black and white, faded, with pictures subsequently fuzzy and difficult to analyze. The experienced DIYer will figure this one out with or without the instructions, but the less experienced DIYer may well struggle a bit here. There are two sides to be repaired. The first side took me 15 minutes to slowly puzzle out, the second side was less than 5 minutes once I grasped how all the pieces fit together.

I removed the old worn parts completely and then, following the instructions and trying to look at the pictures which were very dark and not able to be seen very well, I put the new parts on and replaced the rack in the dishwasher. The repair was fairly simple but would have been easier if the pictures on the instructions had been better.

Took a bit of interpretation to figure out how the piece fit together. Not same as the original. Once i decoded the system, the second side took less than 10 minutes. Fits and works fine.

removed old basket adjuster -installed wheel assemble-installed clips to hold wheel assemble installed adjuster on basket installed final adjuster part with screws supplied--instruction photos not clear and to small -first side took about an hour-the second side took ten minutes -parts work great-anyone with common sense can do the repair

Removed upper rack.Replaced both side rack adjusters purchased from Kitchen Aid. Replaced upper rack and checked for easy operation. They were made superior to original parts, what I would call an upgrade. The instructions are well written easy to follow and in order of completion. One word of advice, dont snap keepers in place untill you are sure they are in correctly. The picture quality could be improved to better assist anyone not used to doing these type of tasks.
D Burton

. This is the second time we have had this defect with this machine. Apparently due to the frequent failures KitchenAid have redesigned the whole adjuster assembly using a mix of materials rather than all plastic. I was therefore supplied two complete assemblies, for which both existing assemblies had first to be removed. The installation instructions supplied with these replacements were not clear, although the text was intelligible. The photographs of the required work as "figures" were however almost unintelligible. The first side took a long time to complete with much trial and error. Once complete this followed as a model for the second side that went much quicker. Most important to watch for the side of the sliders to be outwards since the illustration is wrong. A similar situation exists with the adjustment button and assembly which can be installed in any of four ways, although only one will work. Finally an "errata" insert indicated that a special tool was included in the hardware set for installing the two screws using a Phillips screwdriver; this was not included in my set, although fortunately I had a socket set with this tool included.