Models > 41741122310 > Instructions

41741122310 Kenmore Washer - Instructions

All Instructions for the 41741122310
31 - 45 of 75
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
While using washer a E9F code appeared and stopped working.contacted parts select trouble shooting site they told me what it was ordered the part they were right on!back washing again thanks so much for the help!
Did it with no problems at all just followed the video step by step worked great done in 1hour!
Parts Used:
Motor Control Board
  • Stephen from DELTONA, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Latch on door broke. It is made of plastic and just broke off.
just unscrewed the old one and put a new one on.
I bought two just in case this one breaks too.
Parts Used:
Door Strike
  • Sharon from Wichita, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bkn door strike
Very simple hardly worth writing about.
Parts Used:
Door Strike
  • Jeffery David from Chesaning, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door on washer broke lots of laundry to do!
I was amazed at how quickly my part came for the washer and it came to me on a Saturday
Parts Used:
Door Strike
  • David from Cos Cob, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not cycling
put new part did reset on main controles
Parts Used:
Water Level Pressure Switch
  • donna from gardnerville, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door striker was broke
unscrewed the 2screws from the striker on the washer door first. Then put screwed new striker on door with its new screws. It was a piece of cake.
Parts Used:
Door Strike
  • Melissa from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine would not start
Unscrew the the bad part, screw on the new part
Parts Used:
Door Strike
  • david from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hungry dog ate the door latch on my front-load washer
ordered the part and got the part in three day. A no hassle experience. Installed the latch and eureka! Fixed!
Parts Used:
Door Strike
  • Richard A. from Newnan, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Strike
Nothing to it rteall. The great thing was how fast this company got the part to me!
Parts Used:
Door Strike
  • Garry from Winchester, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front glass broke
The front loading washer door was wobbely so I took it apart as per wife request. Hinge looked fine, bushings were fine so I started to put it back together... then the glass slipped out and to the ground. Take the time to remove the door hinge and assemble on a flat surface, then place the whole assemble back on the washer machine. Don't try to take door apart while still attached to machine. Try it you will understand and then you will be buying a new glass front.
Parts Used:
Door Glass
  • David from Chandler, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broke the strick on the door. Would not stay closed.
Got on line order the part from PartSelect. Got the part quick and the instructions was so easy my wife fixed it.
Parts Used:
Door Strike
  • David from Searcy, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The door strike broke off so the door would not stay shut
I took off the broken part with a screw driver. I easily found the needed part on your website. After I ordered the part, it came within 2 days. It was the correct part and was replaced within 10 minutes of opening the package. Thanks for the great, easy and quick service!
Parts Used:
Door Strike
  • Joyce from Mequon, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lock on Washer Door broken and would not work
I order the part from this website. I want sent to me in 1.5 days. I removed the srews form the broken latch on the door. I place the new latch on the door, than use a phillip head screw driver and attach the latch to the door.
Parts Used:
Door Strike
  • Pamela from Charleston, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door strike snapped
The door strike on our front loader snapped, thanks to numerous family members slamming the door. I don't know much about repairing appliances, actually, I didn't even know the part we broke was called a 'door strike'. Desperate to regain the use of my washer, I took to the internet superhighway and found PartSelect. PartSelect is such an outstanding shop! Thanks to their forward thinking by using grids, photos to scale, and helpful additional info, I easily found the part I needed (and learned the part's name!). And, my part arrived in one day! On a Saturday! PartSelect will be my go-to shop from now on!
Parts Used:
Door Strike
  • Sheree from Clarksville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Someone opebed the washer door prior to cycle completion
two screws took off the old plate, replaced the door strike with saame screws
Parts Used:
Door Strike
  • H. Edward from Sequim, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 41741122310
31 - 45 of 75
Back to Top